Description
Harness for the passenger seat for Peugeot 207 cars of the first series
Peugeot 207 passenger seat harness 6545GC is an original electrical wiring harness designed for the connection and function of the passenger seat in Peugeot 207 cars of the first series. It enables the correct connection of all necessary components in the seat – typically the occupancy sensor, possible side airbags, seat belt tensioners or other electrical elements depending on the specific equipment of the car. This helps ensure the full functionality of the seat’s safety and comfort systems as designed by the manufacturer.
Manufacturer: PSA Peugeot Citroën
Model: Peugeot 207 (first series)
Location: Passenger seat harness
Category: Electrical components – cable harnesses – others
Product codes: 6545GC
Other numbers: they may vary depending on the equipment version and production series, so it is important to compare the markings, the shape of the connectors and the length of the harness with the original part from the car.
This bundle is suitable for anyone who needs to replace damaged under-seat wiring – whether due to mechanical damage, corrosion of contacts, non-professional intervention or retrofitting. A properly functioning wiring harness is especially crucial for airbag and safety systems, where a faulty signal can cause the airbag light to illuminate, error messages on the on-board computer, or safety features to fail in an accident.
Technical information and features:
– Original harness type for passenger seat Peugeot 207 first series
– Precisely shaped connectors for connecting to the original installation of the car
– Cable routing in protective tubes and bundles according to the original solution
– Designed for used Peugeot 207 vehicles – an ideal replacement for a damaged or non-functioning original harness
– Often searched under catalog number 6545GC or its internal variants
Advantages of using the original passenger seat harness:
– Exact compatibility with Peugeot 207 first series wiring
– Correct function of the sensors, airbag and belt tensioners according to the car’s equipment
– Minimal risk of errors, flashing lights and MOT problems caused by improper wiring
– There is no need to modify connectors or cabling, everything fits into the original installation
Installation recommendations:
– Before any manipulation, always disconnect the battery and observe the safety break (especially for the airbag system).
– Disassemble the seat according to the manufacturer’s service procedure and ensure sufficient access to the wiring under the seat.
– Remove the original bundle only after carefully marking or memorizing the cable routing and the position of the individual connectors.
– Guide the new harness along the same route as the original to avoid pinching, chafing or stretching when the seat is moved.
– Check that all connectors are fully engaged and securely snapped into the holders so they do not come loose while driving.
– After completing the assembly, connect the battery, erase any error codes in the control unit and verify the function of the airbag and safety systems by diagnosing and checking the lights on the instrument panel.
A correctly selected and professionally installed Peugeot 207 6545GC passenger seat harness helps to restore the full functionality of the electrical and safety installation of the seat and ensures long-term reliable operation of the car.
