Description
Left front door handle for CITROËN BERLINGO III, C4 II, C4 PICASSO and GRAND PICASSO, JUMPY III and PEUGEOT 207, 308, PARTNER III, EXPERT III. Color KTH – LAK GREY THORIUM. We have different colors in stock.
Premium replacement left front exterior door handle designed for Stellantis Citroën and Peugeot models. Ideal for professional workshops and skilled DIYers who need a direct-fit part that restores door operation and exterior appearance. The handle is commonly searched by product code 9101GF KTHB, making it easy to find in parts catalogs and online. Painted finish matches factory color codes and is supplied ready to fit.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Models: Citroën Berlingo III, C4 II, C4 Picasso, Grand Picasso, Jumpy III; Peugeot 207, 308, Partner III, Expert III
- Product Codes: 9101GF, KTHB
- Additional Numbers: KTH (Paint Code – Grey Thorium)
Function And Application
The exterior door handle provides mechanical actuation of the latch to open the left front door. It transfers motion via linkage or rods to the door latch assembly and, depending on vehicle specification, may work together with the lock cylinder, central locking actuator and sensors. A correct-fit handle ensures secure operation, prevents water ingress around the opening and maintains the vehicle’s exterior finish.
Installation Recommendations
- Preparation: Park vehicle on level ground and disconnect negative battery terminal if working near electrical components to avoid accidental short circuits.
- Remove Door Trim: Carefully remove the inner door card, retaining clips and any trim fasteners. Support the door panel to avoid damaging wiring or the speaker.
- Access Handle Fasteners: Peel back the water/vapor barrier to reach the handle mounting bolts and linkage inside the door.
- Disconnect Linkage: Unclip or unbolt the mechanical rods/linkage from the handle. Note the orientation of clips for correct reassembly.
- Remove And Replace: Unscrew the handle mounting screws, remove the old handle and fit the new handle. Ensure sealing surfaces and gaskets are correctly seated to avoid leaks.
- Reassembly And Test: Reconnect linkage, tighten fasteners to secure fit, test door opening and locking function several times before refitting the door card.
- Lubrication: Apply light grease to moving linkages and pivot points for smooth operation and corrosion protection.
- Tools And Time: Typical tools required include Torx/Phillips/10 mm sockets, trim tools and pliers. Replacement time: approximately 30–60 minutes for trained technicians; allow more time for DIYers.
Why This Part Commonly Fails
- Plastic Fatigue And Breakage: Repeated use and mechanical stress can crack internal levers or mounting bosses, especially on high-mileage vehicles.
- Clip And Rod Wear: Small plastic clips and connecting rods can become brittle and snap, causing handle actuation failure.
- Corrosion And Seizure: Moisture ingress around seals can corrode metal components in the latch, increasing load on the handle and causing premature failure.
- Impact Damage: Parking impacts or attempted break-ins can deform or fracture the exterior handle.
- Surface Degradation: Painted finishes can chip or fade due to stone chips, road salt and UV exposure; replacing the handle restores appearance.
This door handle is supplied as a direct-fit replacement for the listed models and is a practical solution to restore reliable door operation and finish. Always follow safe workshop practices when working on door assemblies and verify fitment by the product code 9101GF KTHB before ordering.
