Description
Driver’s left-seat armrest for CITROEN, PEUGEOT and other Stellantis models
Used part – may be dirty – must be cleaned
Fixed
Part description
Driver’s armrest with product number 9827280780 provides comfortable arm support while driving. It is a suitable choice when replacing a damaged or missing armrest, provided it matches the design and mounting of the original part. Matching the correct design helps restore seat comfort without unnecessary modifications to the interior.
This is a used part for the driver’s left seat, described in the source information as fixed. Expect possible dirt and the need for cleaning before installation. When selecting a part, compare in particular the number 9827280780, the shape of the armrest and its mounting method with the existing part.
Technical information
- Manufacturer: not specified; the source information lists the designation Stellantis CITROEN PEUGEOT.
- Model: Citroën Berlingo K9, FIAT DOBLO III, OPEL COMBO E K9, PEUGEOT RIFTER, Toyota ProAce City.
- Part type: armrest.
- Application: driver’s left seat.
- Design according to source information: fixed.
- Condition: used part, may be dirty; must be cleaned.
- Additional numbers: not specified.
The models are taken from the product labels. Specific model years, trim levels and seat configurations are not specified; the model name alone is therefore not sufficient information for selecting a part.
Product codes
- Product codes: 9827280780.
Use the product number as the main reference when looking for a replacement Citroën Peugeot armrest, and also compare the design and mounting.
Installation recommendations
General guidance for this type of part: the method for removing and mounting an armrest depends on the specific seat and vehicle configuration. The following procedure is general and is not an installation guide for each of the models listed. Check the manufacturer’s service procedure for the exact mounting design.
1) Before installation
- Compare the product number, shape, dimensions and mounting section with the original armrest.
- Inspect the used part, especially for cracks, deformation, surface damage and the condition of the mounting points.
- Also inspect the mating part in the seat. A damaged mounting point cannot be fixed simply by replacing the armrest.
- Clean the armrest with a product suitable for its actual surface. Test it first in an inconspicuous area and allow the part to dry.
2) Required tools and materials
- Hand tools suitable for the actual fasteners.
- A plastic trim removal tool for interior covers, if present.
- A soft cloth, suitable cleaning product and protection for the surrounding upholstery.
- A flashlight and a container for safely storing removed components.
3) Step-by-step installation procedure
- Park the vehicle safely, secure it against movement and switch off the ignition.
- Adjust the seat to give you access to the mounting and avoid damaging the surrounding interior. If the work requires disconnecting the seat’s electrical connectors, first follow the manufacturer’s instructions for safely disconnecting the power supply.
- Inspect the original armrest’s mounting and determine the specified release method. Do not try to pull the part off or force it to rotate.
- If covers are hiding the mounting, carefully remove them with a suitable tool without damaging the upholstery.
- Record the position and order of the mounting components, for example by taking a photo.
- Hold the armrest and release its mounting using the method appropriate to the seat design.
- Remove the original part, clean the contact surfaces and check that the mounting in the seat is not loose or damaged.
- Position the replacement armrest and check that it fits correctly. If the mounting does not match, stop the installation; do not force or modify the part.
- Secure the armrest according to the manufacturer’s service procedure and use only undamaged mounting components suitable for the specific configuration.
- Refit any covers, check that they are seated correctly, and remove tools and protective materials from the interior.
4) Post-installation checks and function verification
- With the vehicle stationary, check that the armrest is firmly secured, has no unusual play and does not come loose when supporting an arm normally.
- Check that it does not restrict seat adjustment, use of the seat belt or access to controls.
- Inspect the surrounding upholstery and any covers. Nothing should be trapped or loose.
- A separate test drive is generally not necessary. During your next drive, listen for any knocking or squeaking; carry out any further checks only after stopping safely.
5) Common installation mistakes and how to avoid them
- Selecting a part based only on the vehicle model: also compare the product number and mounting design.
- Forcing off covers or the armrest: first determine how it is secured and use suitable tools.
- Incorrect tightening or securing: follow the manufacturer’s procedure; excessive force can damage the mounting.
- Overlooking seat damage: also check the mating part and its stability before installation.
- Soaking the part or using aggressive cleaning products: use a product suitable for the actual material and let the part dry before installation.
Reasons why the part gets damaged
Armrests generally become damaged through prolonged use, excessive loads and rough handling. The following causes do not describe defects identified on this specific part.
- Putting body weight on the armrest when getting in or out can overload its structure and mounting.
- Repeated use leads to surface abrasion and gradual wear of the mounting components.
- Impacts while transporting objects can cause cracks or deformation.
- Driving with a loose mounting can increase play and further strain the contact surfaces.
- Unsuitable cleaning and spilled liquids can damage the surface or leave dirt that is difficult to remove.
- Improper removal can damage the covers, retaining elements and the mounting itself.







