Description
Steering wheel for PEUGEOT 307 CC and 307 cars
Color: HZR – ASTRAKAN GRAY
Part description
A used Peugeot 307 CC / 307 steering wheel is an ideal choice when replacing a worn or damaged steering wheel in the interior. A correctly chosen steering wheel will significantly improve driving comfort, secure grip and the overall impression of the cabin – especially if the original piece is worn, slides in the hand or has a damaged surface.
The part is in the specification HZR color – ASTRAKAN GRAY. When choosing, we recommend following the product codes listed below.
Technical information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Peugeot 307 CC, Peugeot 307
- Other numbers: NFP
Product codes
- Product codes: 96467818ZR, 4109EZ
Installation recommendations
Generally/typically for the replacement of the steering wheel, it is true that it involves work in the area of airbags and safety elements – the procedure may vary according to the specific design of the car. If you are not sure, entrust the installation to a professional service.
1) Before assembly
- Check that the part codes (96467818ZR, 4109EZ) match and that the HZR color finish – ASTRAKAN GRAY matches.
- Compare the new and original steering wheel: shape, fit, any holes/grooves and connections to internal steering wheel components (if included).
- Assess the condition of the used part: rim damage, cracks, deformation, stripped threads/fastening.
2) Necessary tools and materials
- Normal set of gola/ratchet and extension (according to specific design)
- Torx/Imbus bits (according to specific design)
- Flat latch/cover release tool (ideally a plastic pry bar)
- Fix/position marker
- Clean gloves and a cloth for cleaning the contact surfaces
3) Step-by-step assembly procedure
- Park straight, align the wheels in a straight line and turn off the ignition.
- Disconnect the battery and wait a few minutes for the airbag system to safely deactivate.
- Disassemble the airbag unit from the steering wheel (the attachment method varies according to the design – work carefully and without violence).
- Disconnect the airbag connectors and any control elements; release the connectors gently, without pulling on the cables.
- Mark the position of the steering wheel relative to the shaft (mark with a marker) to maintain the correct orientation.
- Undo and remove the steering wheel center mount.
- Remove the steering wheel from the shaft – if it holds, release it evenly (do not tilt sharply to the sides).
- Check the mating surfaces and cable routing/connector ends, clean them if necessary.
- Fit the new steering wheel in the position according to the marks and check that it fits without play.
- Tighten the central attachment (according to the manufacturer’s procedure for a specific design).
- Reconnect the connectors (airbag/control) and check that the latches are properly engaged.
- Install the airbag back into the steering wheel and check that it is properly seated.
-
4) Post-assembly checks and test drive/function verification
- Connect the battery and check whether the airbag warning light behaves abnormally when the ignition is switched on.
- Check that the steering wheel is straight when driving in a straight line and that it turns smoothly without rubbing.
- Verify the function of the elements on the steering wheel, if they are present (depending on the equipment).
5) The most common assembly mistakes + how to avoid them
- Battery not disconnected before working on the airbag – always disconnect and wait a few minutes.
- Unmarked position of the steering wheel – the result may be a crooked steering wheel; always mark the location.
- Connector/cabling damage – do not pull on the cables, release the latches in the correct direction.
- Force pulling the steering wheel – release evenly, without prying, so as not to damage the attachment.
Reasons why the part is damaged
- Surface wear of the steering wheel rim (frequent use, sweat and dirt).
- Mechanical damage (cracks, abrasions, deformation after impact).
- Aging of the material and loss of strength/surface treatment due to temperature and UV radiation.
- Incompetent disassembly/assembly resulting in damage to the mounting or wiring in the steering wheel area.
