Leather Steering Wheel for Citroën C5 I and II 96500039ZE 4109FN

Description

Leather steering wheel for Citroën C5 I and II vehicles from 2001 to 2007. Shows light signs of use — see photos.

High-quality leather steering wheel compatible with Citroën C5 first and second generation (2001–2007). Ideal for mechanics and DIY enthusiasts who need an original-style replacement that maintains factory ergonomics and airbag mounting. The wheel preserves the original fitment and appearance, offering improved grip and cabin feel compared to heavily worn originals. Product is listed under known part references, which makes searching by code convenient for workshop supply chains.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C5 I and II (2001–2007)
• Product Codes: 96500039ZE, 4109FN
• Additional Numbers: NFP

Function And Fitment

The steering wheel provides the primary interface for driver steering input, houses the driver airbag module and horn contacts, and may carry switches for convenience functions depending on vehicle specification. This unit is designed to fit the standard steering column and airbag mounting of Citroën C5 models from 2001 to 2007; verify the wheel finish and switch layout match the vehicle specification before installation.

How To Replace

1. Always disconnect the battery before starting and wait the manufacturer‑recommended time for residual charge to dissipate.
2. Set the front wheels straight and mark the steering wheel position relative to the shaft to ensure correct reinstallation alignment.
3. Carefully remove the airbag module following manufacturer procedure (unclips/screws), handling the airbag with care and facing it upward when placed aside.
4. Disconnect airbag and horn connectors and any steering‑wheel switches; release the central retaining nut and remove the wheel (a puller may be required on some models).
5. Transfer any controls, trim pieces or the airbag module to the replacement wheel if required and permitted.
6. Reinstall the wheel in the marked position, torque the central nut to manufacturer specification, reconnect all connectors and refit the airbag.
7. After reconnection, clear any fault codes and verify airbag and steering‑wheel functions with suitable diagnostic equipment.

Installation Recommendations

• Disconnect the battery before disassembly and follow Citroën safety procedures to avoid damage to the airbag and steering‑column electronics.
• Mark wheel position before removal to preserve steering alignment.
• Use the correct tools (steering wheel puller, torque wrench) and avoid levering on trim to prevent damage.
• If the clockspring (spiral cable) shows wear or airbag/horn faults appear after installation, replace the clockspring rather than forcing reuse.
• For work that involves airbag removal or electrical diagnostics, consider using workshop diagnostic equipment to clear codes and verify correct function.

Why The Part Most Often Fails

Steering wheels on older vehicles typically show cosmetic wear first: leather abrasion, surface cracking, discoloration from UV exposure, and worn seams due to frequent handling. Mechanical or electrical issues can appear if the clockspring (spiral cable) is worn, causing intermittent horn or steering‑wheel switch failures, but the wheel structure itself rarely fails catastrophically. Damage can also occur during improper removal or reinstallation if the airbag or connectors are mishandled.

Additional Notes

Item Shows Light Signs Of Use As Photographed. Suitable For Workshop Replacement And DIY Repairs By Experienced Technicians. Searchable By Product Codes 96500039ZE And 4109FN For Convenient Stocking In Repair Shops.