Description
Seat Belt For Citroën C8 And Peugeot 807 Vehicles. Left Front Seat – Driver.
This high-quality replacement seat belt is designed for the left front (driver) position in Citroën C8 and Peugeot 807 models. Supplied with original product codes 14864390XX and 8974XF, the belt restores proper restraint function and occupant safety after wear or collision-related deployment. Ideal for professional workshops and DIY mechanics who need a reliable, direct-fit part that meets OE fitment standards.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C8, Peugeot 807
- Product Codes: 14864390XX, 8974XF
- Additional Numbers: None Specified
Function And Features
The Seat Belt Assembly Provides Primary Occupant Restraint During Normal Driving And Locks During Sudden Deceleration To Reduce Forward Movement. Many Assemblies Include A Retractor Mechanism With Inertia Locking And A Pyrotechnic Pretensioner (Depending On Vehicle Specification) That Activates In A Collision To Remove Slack From The Webbing.
How To Replace
Replacement Should Be Performed By A Trained Technician Or An Experienced DIY Mechanic Following The Vehicle Manufacturer’s Procedure. General Steps:
- Disconnect The Battery And Wait The Manufacturer-Specified Time To Minimize The Risk Of Accidental Pretensioner Deployment.
- Remove Interior Trim Panels To Access Upper Anchor, Retractor, And Lower Anchor Bolts.
- Disconnect Any Electrical Connector For The Pretensioner If Present.
- Unscrew The Mounting Bolts, Remove The Old Assembly, And Fit The New Belt In The Same Orientation.
- Reinstall Bolts And Tighten To The Manufacturer’s Torque Specification; Replace Any Stretched Or Damaged Fixings.
- Reconnect Electrical Connectors, Refit Trim, Reconnect The Battery, And Check That The Belt Retracts Smoothly And Locks When Pulled Sharp.
Installation Recommendations
- Always Follow The Manufacturer’s Torque Settings And Service Procedures Listed In The Workshop Manual.
- Disconnect The Battery Before Starting Work And Observe Recommended Waiting Times To Prevent Accidental Pretensioner Deployment.
- Replace The Entire Assembly If The Pretensioner Has Fired Or If The Webbing Is Cut, Frayed, Or Heavily Stained.
- Do Not Reuse Damaged Mounting Bolts Or Clips; Use New, Specified Fasteners Where Required.
- After Installation, Perform A Functional Check Of Retraction And Locking Mechanisms; If The Belt Does Not Operate Correctly, Do Not Use The Vehicle Until Resolved.
Most Common Failure Reasons
- Wear And Abrasion Of The Webbing From Long-Term Use Or Improper Handling.
- Contamination Or Debris Causing The Retractor To Jam Or Lock Unintentionally.
- Pretensioner Activation During A Previous Collision (Unit Must Be Replaced After Deployment).
- Corroded Or Loose Mounting Points Due To Moisture Or Previous Repair Work.
- Electrical Connector Issues For Pretensioners Causing Faults Or Loss Of Function.
Searching By Product Codes 14864390XX Or 8974XF Will Help Find This Specific Seat Belt Faster. Always Verify Fitment Against The Vehicle Model (Citroën C8 / Peugeot 807) Before Installation.
