Description
Seat belt buckle for various CITROEN, PEUGEOT and other Stellantis models
Short – for the front passenger seat cushion
Part description
Used seat belt buckle 98163195480 in the short version is designed for the front passenger seat cushion. It secures the seat belt tongue and releases it when unfastened. It is a suitable choice when replacing a damaged or unreliable buckle, provided it matches the original part and vehicle configuration.
When selecting, compare the product number 98163195480, length, shape and mounting method in particular. A matching model name alone is not enough to identify the correct variant. For a safety component, not only correct installation but also faultless operation of the locking mechanism is important.
Technical information
- Manufacturer: not specified
- Model: Citroën Berlingo K9; FIAT DOBLO III; OPEL COMBO E K9; PEUGEOT RIFTER; Toyota ProAce City — according to the supplied labels
- Part type: seat belt buckle
- Version: short
- Application: front passenger seat cushion
- Condition: used part
- Other numbers: not specified
Product codes
- Product codes: 98163195480
Compare the number with the marking on the original buckle and the catalog application for the specific vehicle configuration.
Installation recommendations
In general, the following applies to this type of part: the seat belt buckle is part of the safety restraint system. The procedure below is general; the exact access, mounting and any electrical connection depend on the specific vehicle model and configuration. We recommend having the replacement carried out by a qualified mechanic and following the manufacturer’s service documentation.
1) Before installation
- Compare the part number, short version, body shape, mounting and any connector with the original part.
- Inspect the housing, release button and mounting section. Cracks, deformation, significant corrosion or signs of forced intervention are reasons not to use the part.
- Check that the matching seat belt tongue clicks in and releases smoothly. However, a manual test alone does not confirm the overall safety of the part.
- If there is reason to suspect that the buckle was subjected to load in an accident, or if there is any doubt about its condition, do not install it without professional assessment.
2) Required tools and materials
- Hand tools suitable for the fasteners used and a torque wrench.
- Suitable tools for careful removal of trim panels, depending on access.
- A flashlight, a clean cloth and service documentation for the specific vehicle.
- If the configuration includes an electrical connection, diagnostics may be required for a subsequent check.
3) Step-by-step installation procedure
- Secure the vehicle against movement, switch off the ignition and prepare a safe work area.
- Check the service documentation for the replacement procedure and the rules for working near the restraint system. If the battery must be disconnected, follow the prescribed procedure and waiting period.
- Access the buckle mounting. Remove trim panels or other components only as necessary for the specific configuration.
- Note the original orientation of the buckle, the arrangement of the fasteners and any cable routing.
- If an electrical connector is present, release its lock and disconnect it without pulling on the wires.
- Use suitable tools to loosen the fastener and remove the original buckle. Check the condition of the contact surface and mounting point.
- Compare the two parts again. If the mounting, length or connection differs, do not continue with the installation or modify the buckle.
- Position the replacement buckle in the correct orientation. Follow the manufacturer’s instructions regarding reuse of the fasteners and tightening to the specified torque.
- Connect and secure any wiring so that it is not pinched or stretched when the seat moves. Reinstall any removed trim panels.
- If the battery was disconnected, restore power according to the manufacturer’s procedure and perform functional checks before using the vehicle.
4) Post-installation checks and function verification
With the vehicle stationary, fasten and unfasten the seat belt several times. The tongue must click securely into place, remain locked when pulled by hand, and release when the button is pressed. Check that the buckle is securely mounted and can move freely without interfering with the seat. If the vehicle monitors seat belt use, also check that the indicator works correctly and that there are no restraint system faults. Do not use the passenger seat if anything is not working properly. A test drive does not replace checking the seat belt’s function.
5) Most common installation errors and how to prevent them
- Choosing based on the model alone: also compare the product number and design configuration.
- Incorrect orientation or tightening: follow the service procedure rather than estimating.
- Pinched wiring: if present, check the wires with the seat in different positions.
- Lubricating or dismantling the mechanism: do not apply lubricants to the buckle or interfere with its internal components unless explicitly instructed by the manufacturer.
- Overlooking damage after an accident: do not use a suspect part; have the entire affected restraint system assessed.
Reasons why the part gets damaged
Seat belt buckles in general may be damaged for the following reasons; this is not a description of any defects found in this particular part:
- Wear of the locking mechanism and button due to repeated use.
- Dirt, small objects or spilled liquids entering the buckle.
- Mechanical stress, impacts and forcefully inserting an unsuitable tongue.
- Loading during a traffic accident, which may not be visible on the outer housing.
- Improper removal or incorrect mounting.
- For electrically connected variants, damage to the wires or connector as well.






