Description
Left front driver safety belt for Peugeot 207
Color FXX – Black
Product Description
This left front driver’s seat belt with pyrotechnic pretensioner is designed for Peugeot 207 vehicles. It replaces the factory belt assembly and restores the original safety function after damage or deployment. The assembly includes the retractor with integrated pretensioner and mounting points for a direct fit into the left front seating position. Ideal for professional workshops and competent DIY mechanics seeking a reliable replacement part using manufacturer reference numbers for fast lookup.
Key Features And Function
- Pyrotechnic Pretensioner: Tightens the belt instantly in a severe impact to reduce occupant forward movement.
- Retractor Mechanism: Automatic webbing retraction with load limiter and locking function during sudden deceleration.
- Direct Fit: Designed to match original mounting locations and routing for Peugeot 207 left front seat.
- Color: FXX Black webbing for visual match with original interior trim.
- Reference Numbers Included: Facilitates fast identification by product code.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 207
- Product Codes: 96863758XX, 8975CE
- Additional Numbers: FXX (Color Code)
Fitment And Compatibility
Fits Left Front (Driver) Position on Peugeot 207 models. Compatibility should be verified by matching the product codes listed above to the vehicle’s original part number and position. The assembly is intended to replace the factory left front seat belt with integrated pretensioner and retractor.
When To Replace
Replace the seat belt assembly if the pretensioner has deployed in a collision, if the webbing is frayed, cut, or contaminated, if the retractor fails to lock or retract properly, or if any mounting component shows deformation or corrosion. There is no standard service interval for seat belts; replacement is driven by damage, deployment, or visible wear.
Installation Recommendations
- Safety First: Always disconnect the vehicle battery and follow the manufacturer’s recommended waiting time for airbag/pyrotechnic system discharge before starting work.
- Remove Interior Trim Carefully: Gain access to the belt retractor and anchorage by removing the required trim pieces without damaging clips or panels.
- Unbolt Mounting Points: Remove the retractor and lower anchor bolts. Keep track of bolt types and locations.
- Disconnect Electrical Connector: If the pretensioner has an electrical connector, disconnect it before removing the assembly.
- Install New Unit: Fit the new assembly in the correct orientation, route the webbing as per OEM routing, and secure all bolts. Tighten mounting bolts to the Manufacturer’s specified torque values (refer to the vehicle service manual).
- System Check: Reconnect the battery and verify that the airbag/seat belt warning indicators behave correctly. Perform a visual check for correct belt operation and free movement.
- Professional Tooling Recommended: Some fault codes or indicator resets may require a diagnostic tool; a professional workshop with PSA-capable equipment can clear related faults if needed.
Most Common Reasons For Failure
- Deployment During Collision: Pyrotechnic pretensioners activate in significant impacts and must be replaced after deployment.
- Physical Damage Or Wear: Frayed or cut webbing, damage from sharp edges, or contamination that weakens the fabric.
- Corrosion And Seizure: Corroded mounting bolts or seized retractors due to moisture ingress can prevent proper operation.
- Internal Mechanism Fault: Retractor locking or load limiter malfunction from age or internal contamination.
Additional Notes
Use the listed product codes when searching or ordering to reduce the risk of incorrect fitment. Always follow the vehicle manufacturer’s safety procedures when working with pyrotechnic components and restraint systems.
