Description
Left Front Driver Seat Belt For PEUGEOT 206 And 206+ Color FXX – Black
Product Overview
This left front driver seat belt is a direct-fit safety component designed for Peugeot 206 and 206+ models. It features a pyrotechnic pretensioner for rapid seat-belt tightening in the event of a collision, combined with an automatic retractor and locking mechanism to secure the occupant reliably. The black FXX webbing offers a factory-correct appearance for interior restorations and repairs.
Compatibility
Designed For: Peugeot 206, Peugeot 206+
Commonly Searched By Part Numbers: 96468609XX, 8973SF, 8973WK, 8974GT
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 206; Peugeot 206+
- Product Codes: 96468609XX, 8973SF, 8973WK, 8974GT
- Other Numbers: 96468609XX, 8973WK
Function And Typical Failure Modes
The seat belt assembly secures the occupant during normal driving and restrains movement during a crash. The pyrotechnic pretensioner activates in a collision to remove slack instantly, improving occupant restraint. Common reasons for replacement include:
- Deployment Of The Pretensioner During A Crash — Pretensioners Are Single-Use And Must Be Replaced After Activation.
- Frayed, Cut Or Heavily Worn Webbing That Compromises Strength.
- Retractor Malfunction — Belt Fails To Retract Or Locks Up Irregularly Due To Contamination, Corrosion Or Internal Wear.
- Electrical Or Connector Faults Affecting The Pretensioner Circuit, Often Accompanied By An SRS Warning Light.
Replacement Guidance
Replacing a seat belt with a pyrotechnic pretensioner requires care and basic electrical safety steps. Recommended procedure for qualified mechanics or experienced DIYers:
- Disconnect The Battery And Observe The Manufacturer’S Prescribed Waiting Time (Typically 10–15 Minutes) To Allow SRS Capacitors To Discharge.
- Remove Interior Trim Panels Around The B-Pillar And Seat To Access Mounting Bolts And The Pretensioner Connector.
- Unplug The Pretensioner Electrical Connector Carefully; Avoid Pulling On The Wiring Harness.
- Unbolt The Lower Anchor And Upper Mounting Bolt(s). Keep Fasteners If In Good Condition, Otherwise Replace With New Hardware And Torque To Manufacturer Specifications.
- Fit The New Unit In Reverse Order, Ensuring Correct Routing Of The Webbing And Secure Electrical Connection To The Pretensioner.
- After Installation, Reconnect The Battery And Verify That The SRS/Warning Lights Behave Normally. If The Airbag Or SRS Light Persists, Diagnose With Appropriate Diagnostic Equipment.
Installation Recommendations
- Always Follow Peugeot Manufacturer Instructions And Torque Specifications For Mounting Bolts.
- Use Suitable Tools And New Fasteners If Original Hardware Is Damaged Or Corroded.
- Inspect Anchor Points And Seat Structure For Deformation Or Corrosion Before Mounting The New Belt.
- Do Not Attempt To Repair A Pretensioner Unit Or Its Electrical Connector; Replace The Entire Assembly If Faulty.
How Often To Replace
Seat belts are designed to last the life of the vehicle under normal conditions, but immediate replacement is required after any collision where the pretensioner has activated, and when webbing or retractors show visible wear or mechanical failure. Regular visual inspections during service intervals are recommended.
Why Choose This Part
This OEM-compatible left front seat belt restores critical occupant protection and maintains factory appearance for Peugeot 206/206+ interiors. Use the listed product codes when searching or ordering to ensure quick identification and fitment.
