Description
Rear seat belt left and right for Peugeot 307 hatchback and Citroën C4 3- and 5-door.
Replace worn or damaged rear seat belts with a direct-fit part referenced 96567808XX / 8974JK. This rear seat belt assembly is aimed at professional mechanics and confident DIYers working on Peugeot 307 and Citroën C4 vehicles. The belt restores reliable occupant restraint, smooth retraction and secure locking—key for safety compliance, MOT checks and peace of mind after accidents or long-term wear.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Peugeot 307 (Hatchback); Citroën C4 I (3-door and 5-door)
- Product Codes: 96567808XX
- Other Numbers: 8974JK
Function and Application
The rear seat belt secures rear passengers by restraining movement during sudden deceleration or collision. It features webbing that retracts into a retractor mechanism and a latch that secures to the vehicle anchorage. Properly functioning belts reduce injury risk and are essential for passing vehicle inspections.
Fitment and Compatibility
Intended for rear left and rear right positions on Peugeot 307 hatchback and Citroën C4 I 3- and 5-door models. Always verify visible mounting points and product codes against the part being replaced to ensure correct fitment for the specific vehicle variant.
Replacement Procedure
- Park the vehicle on level ground and follow basic workshop safety.
- Disconnect the negative battery terminal and wait per manufacturer guidance if the vehicle is equipped with pyrotechnic pretensioners or airbags.
- Remove relevant interior trim panels to access the belt retractor and anchor bolts.
- Unbolt the lower anchorage and the retractor mounting bolts; carefully remove the old belt assembly.
- Install the new belt in the correct orientation, ensuring webbing is untwisted and feeds smoothly.
- Tighten mounting bolts to the manufacturer’s torque specifications and refit trim.
- Reconnect the battery and check belt operation: free retraction, locking on quick pull, and correct buckle engagement.
Installation Recommendation
- Use proper tools and follow vehicle manufacturer torque settings for mounting bolts.
- Replace any corroded or damaged mounting hardware and inspect anchor points for structural integrity.
- Ensure the webbing is not twisted and the retractor locks under sudden pulls.
- If the vehicle has seat belt pretensioners or airbag systems, follow manufacturer safety procedures when disconnecting and reconnecting the battery.
- After installation, perform a functional check and a quick road test to confirm correct operation.
Why The Part Fails Most Often
- Wear And Abrasion: Repeated use causes webbing fray or weakened fibers, reducing performance.
- Retractor Failure: Dirt, corrosion or internal spring/wheel wear can prevent smooth retraction or locking.
- Impact Damage: Deployment forces or previous collisions can deform components or activate pretensioners.
- Corrosion Of Mountings: Moisture and salt can corrode anchor bolts and mounting points, compromising security.
- Contamination: Spills, grit or foreign objects can jam the retractor mechanism.
Common Symptoms Indicating Replacement
Visible frayed or cut webbing, belt that does not retract or locks improperly, unusual noises from the retractor, loose or corroded mounting points, and belts affected by a previous collision.
Choosing the correct rear seat belt assembly with the matching part codes (96567808XX / 8974JK) ensures direct fitment and restores the original safety function of the vehicle. Ideal for mechanics and experienced DIYers performing accurate, safety-critical repairs.
