Description
Right passenger seat armrest joint for CITROEN, PEUGEOT and other Stellantis models
Solid
Part description
The used passenger armrest joint 1684935080 is a mechanical component that attaches the right seat armrest. When repairing a damaged attachment, the fault can be addressed by replacing the joint alone, provided the other armrest components are in good condition. A secure armrest attachment contributes to comfortable seat use and limits unwanted movement at the joint.
The documentation lists the Citroën Berlingo K9, PEUGEOT RIFTER, FIAT DOBLO III, OPEL COMBO E K9 and Toyota ProAce City models. When selecting a part, rely primarily on the product number 1684935080 and a match with the design of the original part; the model name alone may not distinguish all seat and armrest versions.
Technical information
- Manufacturer: Stellantis
- Model: Citroën Berlingo K9 | FIAT DOBLO III | OPEL COMBO E K9 | PEUGEOT RIFTER | Toyota ProAce City
- Part type: armrest joint
- Application: right passenger seat armrest
- Condition: used part; described in the original listing as “Solid”
- Additional numbers: not specified
Product codes
- Product codes: 1684935080
The number is used to identify the part and compare it with the marking on the original joint. Before replacement, also compare the shape, attachment points and connection to the armrest.
Installation recommendations
The following procedure generally applies to this type of mechanical part. The exact method for accessing, securing and removing the joint depends on the specific model and seat version. The documentation does not include the manufacturer’s installation procedure.
1) Before installation
- Compare the product number, joint shape, mounting surfaces and attachment method with the old part.
- Inspect the used part, paying particular attention to cracks, deformation, damage to contact surfaces and any threads or locking components.
- Also check the mating part on the seat and the armrest itself. Replacing the joint will not eliminate play caused by damage to surrounding components.
2) Tools and materials required
Prepare standard hand tools suitable for the actual fasteners, and, if needed, a plastic trim removal tool, flashlight, soft padding, cleaning cloth and a container for small parts. Determine the tightening method and whether new locking components are required according to the service procedure for the specific version.
3) Step-by-step installation procedure
- Park the vehicle safely and secure it against movement. Adjust the seat to provide convenient access to the armrest.
- Protect the upholstery and surrounding trim from scratches. Take a photo of the original assembly and the position of the armrest.
- If a cover blocks access, release it with a suitable tool according to its attachment method. Do not pry blindly against resistance.
- Check how the joint is secured and support the armrest so that, once the joint is released, it does not put a load on surrounding parts.
- Gradually release the fasteners. Keep the removed components in the order they were removed and note their orientation.
- Remove the damaged joint without using force. If it will not come loose, check again to make sure it is no longer secured.
- Clean the accessible contact surfaces and inspect the attachment. If you find cracks or deformation, address their cause first.
- Fit the replacement joint in the same orientation as the original part. It must seat correctly without having to force it into place with the fasteners.
- Restore the fastening and locking components according to the manufacturer’s procedure. Do not reuse damaged fasteners or overtighten the joints.
- Carefully check the armrest’s operation, then reinstall any covers. Make sure no upholstery is trapped anywhere.
4) Post-installation checks and function verification
With the vehicle stationary, test the armrest throughout its normal range of use. Check that the attachment is stable, that there is no play or unusual noise, and that the covers are seated correctly. Gradually apply only normal pressure from resting an arm on the armrest. After a short drive, check again for knocking or loosening; perform this check only after stopping.
5) Common installation mistakes and how to avoid them
- Confusing different versions: compare the number and design details of both parts before installation.
- Incorrect component orientation: a photo of the original assembly and keeping the removed components in order can help.
- Overtightening fasteners or forcing the part into place: first check that it is seated correctly and follow the manufacturer’s procedure.
- Overlooking damage to the mating part: inspect the entire attachment, not just the joint being replaced.
Reasons why the part may be damaged
For armrest joints, common general causes of damage include prolonged mechanical stress, joint wear or overloading of the armrest. This does not identify the cause of damage to the specific part.
- Leaning your full body weight on the armrest when getting in or out of the vehicle.
- A side impact, sudden pressure or movement against the stop.
- A loose attachment that gradually increases stress on the joint and mating part.
- Improper removal, incorrect reassembly or overtightened fasteners.







