Passenger armrest Citroën Peugeot 9826490980

€42.00

Stellantis CITROEN PEUGEOT
9826490980

1 in stock

SKU: 9967-F8_K24 Categories: , , ,

Description

Armrest for the right front passenger seat for CITROEN, PEUGEOT and other Stellantis models
Used part – may be dirty – must be cleaned
Fixed

Part description

Citroën Peugeot passenger armrest 9826490980 supports the forearm and makes travel more comfortable. This used interior part with a fixed design is intended for the right front passenger seat and is a practical replacement for a damaged or worn armrest, provided it matches the original mounting and seat design.

When selecting a part, compare the product number 9826490980, shape and mounting section with the old part. Please note that the part may be dirty: it must be cleaned before use. The specific color and surface material are not listed in the available information.

Technical information

  • Manufacturer: not specified; the available information lists Stellantis / CITROEN / PEUGEOT.
  • Model: Citroën Berlingo K9 | FIAT DOBLO III | OPEL COMBO E K9 | PEUGEOT RIFTER | Toyota ProAce City.
  • Part type: passenger armrest.
  • Location: right front passenger seat.
  • Design: fixed.
  • Condition: used part; may be dirty, must be cleaned.
  • Other numbers: not specified.

The model names are taken from the product labels. They do not mean that the armrest design is identical for all seat variants; the matching shape and mounting are also decisive.

Product codes

  • Product codes: 9826490980.

Use the number 9826490980 when searching for a replacement armrest and comparing it with the original part number.

Installation recommendations

The following procedure applies generally to this type of interior part. The exact mounting mechanism is not described in the available information. Therefore, adapt removal and installation to the specific seat and the vehicle manufacturer’s service instructions.

1) Before installation

  • Compare the part number, shape, dimensions, orientation and mounting method with the original armrest.
  • Inspect the used part, especially its support and mounting sections. Do not install an armrest with cracked or deformed mounting.
  • Also check the mating part on the seat. Damaged seat mounting can cause looseness even after the armrest is replaced.
  • Clean the surface with a product suitable for the actual material. Test it on an inconspicuous area first, do not soak the part, and let it dry.

2) Tools and materials required

  • Hand tools suitable for the actual type of mounting.
  • A plastic trim removal tool for any covers.
  • Soft cloths, a suitable cleaning product and protection for the surrounding upholstery.
  • A container for removed fasteners and adequate lighting.

3) Step-by-step installation procedure

  1. Park the vehicle in a safe place, secure it against movement and switch off the ignition.
  2. Adjust the seat to make the mounting accessible and cover the surrounding upholstery to prevent damage.
  3. Inspect the original mounting and refer to the service procedure to determine how it is released. Do not interfere with unknown mechanisms or electrical seat connectors.
  4. If the mounting is covered by a cap, carefully release it using a suitable tool. Do not force it off without knowing the location of the clips.
  5. Before disassembly, record the armrest orientation and the order of the mounting components, for example by taking a photo.
  6. Support the armrest and release its retainer in a manner appropriate to the mounting design.
  7. Remove the original part without using force. If it will not release, first check whether it is still secured by another component.
  8. Clean the contact surfaces and inspect the seat mounting. Stop the installation if there are cracks, deformation or a damaged joint.
  9. Compare the removed and replacement armrests side by side. Do not modify a different mounting by drilling, grinding or forcing it into place.
  10. Position the replacement armrest in the correct orientation and secure it according to the manufacturer’s instructions. If the joint is bolted, follow the specified tightening procedure.
  11. Refit any covers and check that the armrest is seated correctly, the mounting is secure and the surrounding seat components move freely.

4) Post-installation checks and function verification

  • With the vehicle stationary, apply moderate pressure to the armrest by hand. It must not come loose, shift in its mounting or exhibit unusual play.
  • Check that it does not obstruct seat controls, the seat belt routing or access to the seat belt buckle.
  • If everything is securely fastened, listen for any knocking or squeaking during a short test drive. Carry out any further inspection or tightening only after stopping safely.

5) Common installation mistakes and how to avoid them

  • Choosing based only on the model name: also compare the product number, shape and actual mounting.
  • Forcing off covers: first determine how they are secured and use suitable trim removal tools.
  • Mixing up the order of mounting components: photograph the assembly before removal and keep the parts organized.
  • Installing into a damaged mating part: check the condition of the seat mounting before fitting the replacement armrest.
  • Insufficient or excessive tightening: follow the manufacturer’s instructions; do not guess or use excessive force.
  • Aggressive cleaning: use a product suitable for the surface, limit moisture and install the part only after it has dried.

Reasons why the part may be damaged

Armrests can generally be damaged for the following reasons. This is not a description of defects identified on the item for sale.

  • Excessive loading: putting the full weight of the body on the armrest when getting in or out can damage the support section or mounting.
  • Everyday wear: prolonged use puts strain on the surface and mounting components, which can gradually develop play.
  • Impacts and snagging on objects: careless handling of luggage or other objects can damage both the surface and the structure.
  • Improper maintenance: aggressive products, rough brushes and excessive moisture can damage the armrest surface.
  • Incorrect removal or installation: forceful prying, incorrect positioning and improper tightening can damage the mounting.

Additional information

Weight 0.9 kg

Unless otherwise specified in the description, all photos are for illustrative purposes only.

We reserve the right to replace the ordered reference with the manufacturer's replacement reference.

The parts come from crashed vehicles, are carefully inspected, and we provide a 12-month warranty on functionality for them.