Description
Glove box cover for PEUGEOT 3008 and 5008 cars of the first series
Color HZE – TRAMONTANE
Part description
The used storage box cover is intended for Peugeot 3008 I and Peugeot 5008 I cars. It is a part from the interior and dashboard category, which is suitable as a replacement for a damaged, cracked or non-functional original box cover.
The advantage is the original design for PSA cars as well as the listed product designations 9685102777 and 8218YT, by which mechanics and home repairers often look for the right part. The color of this piece is HZE – TRAMONTANE, which is an important detail when choosing an interior piece to best match the original appearance of the car.
Technical information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Peugeot 3008 I, Peugeot 5008 I
- Other numbers: 9685102777, 8218YT
Product codes
- Product codes: 9685102777, 8218YT
- Models from labels/backgrounds: Peugeot 3008 I, Peugeot 5008 I
Installation recommendations
For this type of interior part, it is generally true that the exact replacement procedure may vary depending on the specific design of the dashboard and the way it is attached to the car. Below is a typical and safe procedure for replacing the glove box lid.
1) Before assembly
- Check that the shape, color, fit and product numbers match the old part.
- Check the condition of the hinges, stops, lock and possible attachment points.
- Verify that the used part is not cracked, twisted or excessively worn at the points of movement.
- Compare the connection to the surrounding parts of the dashboard so that it will fit correctly after installation.
2) Necessary tools and materials
- Set of common hand tools
- Plastic crowbar for dismantling interior parts
- Screwdrivers or bits corresponding to the connections used
- Clean cloth for cleaning the contact surfaces
- Or a mild cleaner for interior plastics
3) Step-by-step assembly procedure
- Open the glove box and access the attachment points of the original lid.
- Check carefully the method of attachment, whether the lid is attached with screws, pins or latches.
- If necessary, remove the surrounding plastic covering elements so as not to damage the dashboard.
- Remove the original glove box lid and carefully observe the position of all pins, stops and any flexible parts.
- Compare the dismantled part with the new part, especially the spacing of the attachment, the shape of the edges and the closing mechanism.
- Clean the contact surfaces and the attachment area from dust and dirt.
- Place the replacement cover in the correct position and first seat it without using force.
- Attach the lid using the original method of attachment and ensure that all points are evenly seated.
- Slowly open and close the lid several times to verify smooth operation without stuttering.
- Check the alignment with the surrounding parts of the dashboard and fine-tune the position if necessary.
- Reinstall any covers or interior parts that were removed for replacement.
-
4) Post-assembly checks and function verification
- Make sure the lid holds properly in the closed position.
- Check for smooth opening and closing without excessive play.
- Check that it does not rub against the surrounding plastics anywhere and that it is properly seated in appearance.
- Try normal use of the clipboard while opening and closing it.
5) The most common assembly mistakes + how to avoid them
- Exchanging a part by appearance without checking the code – always compare the numbers 9685102777 and 8218YT and the design of the part.
- Damage to plastic handles during disassembly – use a plastic pry bar and proceed without brute force.
- Incorrect seating of hinges or pins – check the correct position of all fasteners before tightening.
- normal wear from frequent opening and closing,
- cracking of the plastic due to the age of the material,
- damage to hinges, latches or stops,
- excessive loading of the box or closing with force,
- mechanical damage to the interior during careless handling or disassembly.
