Description
Right exterior mirror for CITROËN Xsara Picasso, electrically operated. Temperature sensor. Color Grey Metallic EZRC – Paint Grey Aluminium. Passenger Side. 7 Wires. This is a used part; it may be slightly scratched – fully functional.
Product Overview
High-quality replacement right (passenger side) exterior mirror designed for Citroën Xsara Picasso vehicles. Electrically adjustable with an integrated temperature sensor and a 7-pin connector (EZRC). Ideal for professional workshops and DIY mechanics looking for a direct-fit, functional unit. Common search terms: Citroën Xsara Picasso right mirror, EZRC 96570955XT, 96570985XT, 815351.
Features And Function
- Electric Adjustment: Motorized positioning of the glass for precise mirror angle control.
- Temperature Sensor: Provides ambient/side-air temperature input for vehicle systems that use outside temperature information.
- 7-Wire Connector: Multi-pin connector required for power, motor control and sensor signals.
- Painted Finish: Grey Metallic (EZRC / Grey Aluminium) for direct visual match to original trim.
- Used Condition: Functionally checked; cosmetic marks or light scratches possible due to prior use.
Technical Information
- Manufacturer: Citroën / Stellantis
- Model: Xsara Picasso
- Product Codes: 96570955XT, 96570985XT, 815351, EZRC
- Additional Numbers: 7-pin connector
Compatibility And Fitment
Designed to fit Citroën Xsara Picasso models that accept EZRC-coded right side mirrors and the listed part numbers. Verify connector type and mounting points on the vehicle before installation. This unit is supplied as a direct-replacement exterior mirror for the passenger side.
How To Replace (Step-by-step)
- Park the vehicle on a level surface and ensure ignition is off.
- Disconnect the negative battery terminal before starting any electrical work.
- Remove the interior door trim or triangular trim cover to access mirror mounting bolts and connector.
- Disconnect the mirror electrical connector and carefully remove the mounting bolts.
- Remove the old mirror assembly from the door and fit the replacement mirror in place.
- Reconnect the 7-pin connector, secure mounting bolts to manufacturer torque, and reinstall trim pieces.
- Reconnect the battery and test all mirror functions: left/right/up/down adjustment and temperature sensor reporting if applicable.
Installation Recommendations
- Always disconnect the battery before removal or installation to avoid short circuits or damage to vehicle electronics.
- Handle the glass and painted housing with care to prevent scratching during installation.
- Check connector pins for corrosion or bent pins and clean contacts if necessary before reconnecting.
- After fitting, verify full range of motion and proper operation of the temperature sensor signal (if used by vehicle systems).
- For best results, install using appropriate trim tools to avoid damaging interior panels.
Common Failure Causes
- Impact Damage: Collisions or knocks are the most frequent causes of mirror replacement (broken glass, cracked housing, or damaged motors).
- Water Ingress And Corrosion: Moisture entering the connector or motor area can cause intermittent operation or full failure.
- Wiring Damage: Frayed or crushed wiring in the door hinge area can interrupt signals to the motor or temperature sensor.
- Wear Of Internal Motor Or Gears: Prolonged use can lead to reduced responsiveness or complete motor failure.
After Installation — Quick Checks
- Verify mirror adjustment in all directions and that movement is smooth and consistent.
- Confirm the temperature sensor provides a reasonable ambient temperature reading if the vehicle dashboard/system displays it.
- Listen for unusual noises from the motor that could indicate mechanical binding.
Notes
Part Is Supplied Used. Cosmetic Imperfections May Be Present But The Unit Is Functionally Operational. Always Ensure Correct Part Code Fitment Before Installation.
