Right mirror KGQC Citroën C4 Picasso 96851525XY 8153VR

Description

Right Exterior Mirror For Citroën C4 Picasso And Grand C4 Picasso
Electrically Adjustable, Heated, Puddle Light, Temperature Sensor
Passenger Side, 15 Pins (6+6+3)
Color KGQ – Kyanos Blue

Product Overview

This genuine-fit right side exterior mirror is designed for Citroën C4 Picasso and Grand C4 Picasso models. It Provides Electric Adjustment, Integrated Heating Element For Demisting, Puddle Light For Ground Illumination, And An Ambient Temperature Sensor. The Mirror Uses A 15-Pin Connector (Configured As 6+6+3) And Comes In Kyanos Blue (Color Code KGQ / KGQC Where Specified). Ideal For Professional Workshops And Experienced DIYers Looking To Replace A Damaged Or Faulty Door Mirror With A Direct-Fit Unit.

Benefits And Key Features

• Direct Replacement For Factory Mirror — Restores Original Functionality And Appearance.
• Electrically Adjustable Mirror Glass With Integrated Motor For Precise Positioning.
• Heated Glass To Prevent Fogging And Ice Build-Up In Cold Conditions.
• Puddle Light Provides Low-Level Illumination At The Door Area When Unlocking/Opening.
• Built-In Temperature Sensor Useful For Climate Control And Exterior Temperature Readout.
• 15-Pin Electrical Interface (6+6+3) Matches Vehicle Harness For A Secure Connection.
• Body Color Finished In Kyanos Blue For Seamless Visual Integration.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: C4 Picasso, Grand C4 Picasso
• Product Codes: 96851525XY, 8153VR
• Other Numbers: KGQ (Kyanos Blue), KGQC, NFP

Compatibility

Compatible With Citroën C4 Picasso And Grand C4 Picasso Models That Use A 15-Pin Passenger-Side Mirror With Electric Adjustment, Heating, Puddle Light, And Temperature Sensor. Verify Connector Type (6+6+3) On Vehicle Before Purchase To Ensure Correct Fitment.

How To Replace The Mirror (Overview For Mechanics And Experienced DIYers)

1. Prepare Tools: Torx/Screwdriver Set, Trim Removal Tools, Ratchet With Socket Set, Gloves.
2. Remove Interior Triangular Trim Cover On The Door To Access Mirror Mounting Bolts—Carefully Pry Off Trim To Avoid Damage.
3. Support The Mirror From Outside While Removing Fasteners To Prevent Drop Or Breakage.
4. Disconnect The 15-Pin Electrical Connector (6+6+3) From The Mirror—Note Pin Alignment For Reconnection.
5. Unscrew Mounting Bolts And Remove Old Mirror Assembly.
6. Fit New Mirror, Tighten Mounting Bolts Securely, Reconnect Electrical Connector, Reinstall Interior Trim.
7. Test All Functions: Mirror Adjustment, Heating, Puddle Light, And Temperature Sensor Readout If APPLICABLE.

Recommended Installation

• Perform Installation In A Dry, Well-Lit Area. Protect Painted Surfaces With Masking Tape During Work.
• Ensure Connector Is Fully Seated And Retaining Clips Engage To Prevent Water Ingress.
• After Mechanical Fitment, Verify Electrical Functions Before Final Reassembly.
• If The Vehicle Has Memory Or Advanced Features, Check For Any Required Reconfiguration; Most Mirror Replacements Are Plug-And-Play, But Some Vehicles May Require Reinitialisation Using Diagnostic Equipment.
• Use Genuine Fixings Or Equivalent Torque Settings Recommended By Manufacturer; If Unsure, Tighten Securely But Avoid Over-Torquing Plastic Components.

Why This Part Commonly Fails

• Impact Damage From Collisions Or Door Strikes — The Most Frequent Cause Of Mirror Replacement.
• Water Ingress And Corrosion — Moisture Can Corrode Pins And Internal Motors, Causing Intermittent Operation.
• Motor Wear — Repeated Use Of Adjustment And Folding Mechanisms Leads To Gradual Motor Or Gear Wear.
• Heater Or Sensor Failure — Heating Elements And Temperature Sensors Can Degrade Over Time, Especially In Harsh Climates.
• Wiring Harness Damage — Frayed Or Crushed Wires In The Door Hinge Area Can Cause Loss Of Functionality.

Practical Tips For Diagnosis

• Check For Mechanical Obstructions Before Assuming Electrical Failure.
• Inspect Connector Pins For Corrosion Or Bent Pins If Functions Are Intermittent.
• Swap Mirror Functions (If Possible) Or Test With A Known-Good Unit To Isolate Electrical Faults.

Final Notes

This Mirror Is A Direct-Fit Replacement Intended For Professional Workshops And Confident DIYers. Including The Exact Product Codes In Listings Improves Search Visibility For Mechanics Searching By Part Number. If You Require Features Such As Mirror Memory Or Vehicle-Specific Programming, Be Prepared For Possible Diagnostic Reinitialisation On Some Vehicles.