Description
Right Rear Tail Light For Peugeot 207 3- And 5-Door Models. From 2010 With LED Lighting.
This right rear tail lamp is a direct-fit replacement for Peugeot 207 (3- and 5-door) models produced from 2010 that are equipped with LED rear lighting. Designed for professional garages and DIY enthusiasts, the unit restores original rear signalling, brake and position light functions and matches the vehicle’s factory fitment and appearance. Commonly searched by product codes 9686565980 and 6351HQ, this lamp is ideal when the original housing is damaged, waterlogged or the LED modules have lost function.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Peugeot 207 (3- and 5-Door)
- Product Codes: 9686565980, 6351HQ
- Additional Numbers: 6351HQ
Installation Recommendations
Basic replacement steps for a professional or experienced DIYer:
- Park the vehicle on level ground and ensure ignition is off.
- Remove the trim or access panel in the boot to reach the lamp fasteners.
- Unscrew the retaining bolts and carefully pull the lamp unit out a short distance.
- Disconnect the wiring connector by releasing the locking tab; inspect the connector for corrosion or damage.
- Fit the new lamp, connect the wiring harness and secure the unit with the original fasteners, ensuring the sealing surfaces and gaskets are correctly seated to prevent water ingress.
- Check all lamp functions (tail, brake, indicator and reverse if applicable) before reassembling interior trims.
Recommended Practices: Replace any deteriorated seals or clips during installation. Use dielectric grease on connectors to reduce future corrosion. If unsure, have the replacement performed by a qualified technician to ensure correct alignment and sealing.
Most Common Failure Reasons
- Water Ingress And Condensation: Damaged seals or cracked lenses allow moisture to enter, causing corrosion or LED/module failure.
- Impact Damage: Rear-end collisions or bumps commonly crack the lens or housing.
- Connector Corrosion Or Wiring Faults: Corroded contacts or compromised wiring can interrupt power to the lamp.
- Age-Related Deterioration: Seals, clips and mounting points can degrade over time, leading to poor fitment and leaks.
Searching Tip: Many customers locate this part using the product codes 9686565980 or 6351HQ — include these codes when searching to quickly find the correct lamp for Peugeot 207 vehicles with LED rear lighting.
