Description
Center armrest upholstery for PEUGEOT 3008 and 5008 first series cars
Color HZE – TRAMONTANE
Part description
This used interior part is intended for Peugeot 3008 I and Peugeot 5008 I cars. It is about the upholstery of the center armrest, which is important not only in terms of the appearance of the interior, but also for everyday comfort when using the car.
The part is suitable as a replacement for damaged, scratched or aesthetically worn original upholstery. The advantage is the original design from the manufacturer Stellantis Citroën Peugeot and the color marking HZE – TRAMONTANE, which helps preserve the original appearance of the vehicle’s interior.
Technical information
- Manufacturer: Stellantis Citroën Peugeot
- Model: Peugeot 3008 I, Peugeot 5008 I
- Other numbers: 9686610877, 9676001577, 9682928577, 7591S9
Product codes
- Product codes: 9686610877, 9676001577, 9682928577, 7591S9
- Models from labels: PEUGEOT 3008 I, PEUGEOT 5008 I
Installation recommendations
For this part, the exact replacement procedure may vary depending on the specific design of the armrest and the way the upholstery is attached. In general, it is the replacement of an interior upholstery part, where it is important to proceed with care in order not to damage the plastic handles or the surrounding parts of the interior.
1) Before assembly
- Check whether the new and original part match in shape, color and mounting design.
- Compare all mounting points, latches, guide points and any bearing surfaces.
- Check the condition of the used part, especially the upholstery surface, edges and fastening parts.
- Before disassembly, visually check how the original upholstery is seated.
2) Necessary tools and materials
- plastic crowbar for dismantling interior parts
- basic set of hand tools
- clean cloth or tea towel
- means for gentle cleaning of contact surfaces
- work gloves
3) Step-by-step assembly procedure
- Prepare your work area and ensure that there are no objects around the elbow console that would interfere with disassembly.
- Carefully dismantle the original damaged or worn upholstery according to the type of attachment.
- When loosening, use a plastic pry bar to avoid scratching the plastic parts of the interior.
- After removing the old part, check the condition of the supporting part of the console and all fixing points.
- Remove dirt, dust and any remaining dirt from the contact surfaces.
- Place the new part on the blank and verify that it fits correctly at all contact points.
- Set the upholstery in the correct position and gradually press it down so that the individual handles fit evenly.
- Do not apply excessive force to one spot; distribute the pressure gradually over the entire length of the part.
- After fixing, recheck the seating of edges, corners and connected interior parts.
- If it was necessary to remove other cover or connecting parts during disassembly, reassemble them in the reverse order.
-
4) Post-assembly checks and function verification
- Check that the part holds firmly and does not come loose anywhere.
- Verify that the upholstery matches the surrounding parts of the interior properly.
- Test normal use of the armrest and observe for movement, creaking or crooked seating.
- After a short period of use, visually check the fastening again.
5) The most common assembly mistakes + how to avoid them
- Swapping part design – always compare the shape, color and fit with the old part before assembly.
- Damage to handles during disassembly – use appropriate plastic tools and take your time.
- Incorrect seating – first place the part on a clean surface and only then click it.
- Excessive pressure during installation – press evenly, not in spots.
- Leaving dirt under the part – always clean the contact surfaces before final seating.
Reasons why the part is damaged
- normal wear from everyday use of the armrest
- abrasion of the surface from hands, clothes or transported objects
- mechanical damage due to careless handling in the interior
- cracking or loosening of fasteners during previous disassembly
- aging of material and loss of original appearance due to use
