Description
Left side mirror for CITROËN C4, electrically operated. Colour KCW – Paint Sand (Sable de Langrune). 7 PIN (5+2). Driver’s door.
This left side replacement mirror is designed as a direct-fit option for Citroën C4 vehicles equipped with a 7-pin connector and matching door fittings. Ideal for professional workshops and DIY mechanics, the unit restores factory appearance thanks to the KCW sand paint finish (Sable de Langrune) and provides the electrical interface needed for mirror adjustment and additional functions depending on vehicle specification. Commonly searched by part numbers 96548384 and 8149ZW, this mirror helps you quickly locate the correct replacement when repairing or refurbishing the driver-side door.
Compatibility And Application
Compatible With: Citroën C4 models fitted with a 7-pin (5+2) mirror connector on the driver side. Verify that the vehicle uses the KCW colour code if a painted finish is required. This item suits cars where the mirror assembly mounts to the driver’s door and uses the corresponding electrical harness.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën C4 (Driver Side)
- Product Codes: 96548384, 8149ZW
- Other Numbers: Colour Code KCW (Sand / Sable de Langrune), Connector: 7-pin (5+2)
Functions And Notes
The mirror is electrically operated (adjustment). The 7-pin connector (5+2) indicates support for multiple electrical functions depending on vehicle equipment level. Depending on the original vehicle specification, additional features such as heated glass, power folding or integrated indicators may be present—this mirror provides the electrical interface to support such features when present on the vehicle.
How To Replace
- Disconnect the battery before starting work to avoid short circuits and electrical damage.
- Remove the interior door trim or triangular trim cover to access the mirror retaining bolts and electrical connector.
- Disconnect the mirror electrical connector and remove the securing nuts/bolts holding the mirror to the door.
- Remove the old mirror assembly and fit the replacement, ensuring the gasket/seal sits correctly to prevent water ingress.
- Tighten fasteners to manufacturer recommendations, reconnect the electrical connector and reassemble the door trim.
- Reconnect the battery and test all mirror functions (adjustment, heating, folding, indicators if applicable) and correct mirror alignment.
Installation Recommendations
- Always disconnect the battery before removal and follow the vehicle manufacturer’s assembly sequence to avoid damage.
- Handle painted surfaces carefully to prevent scratches—use protective coverings on door panels during installation.
- Check connector pins for corrosion or deformation and clean if necessary before reconnecting.
- If the vehicle has memory or advanced driver assistance features tied to the mirror, final checks and calibrations should be carried out with appropriate diagnostic equipment.
- Use suitable torque settings for mirror fasteners as specified in the service manual.
Most Common Reasons For Failure
- Physical impact or collision damage—mirrors are exposed and frequently damaged in minor accidents or curb strikes.
- Water ingress and corrosion around connectors or motors leading to electrical failure.
- Wear of the electric adjustment motor or folding mechanism over time.
- Broken or fatigued wiring in the door harness caused by repeated door movement or improper previous repairs.
This mirror is a practical choice for restoring function and appearance on Citroën C4 driver-side doors. Searchable by reference numbers 96548384 and 8149ZW, it is aimed at mechanics and competent DIY enthusiasts seeking a reliable replacement part.
