Description
Control module, ABS pump, unit, Bosch ABS cube
From 2009 PEUGEOT 3008 2.0HDI RHE
Tested fully functional
Original Bosch ABS/ESP control unit (so-called ABS cube, hydraulic block with ECU) for Peugeot cars. The part is taken from a Peugeot 3008 2.0 HDi (RHE), year 2009. The unit has been tested and is fully functional. Thanks to the mentioned codes, it is easy to find and suitable for replacing a faulty module in vehicles with the same equipment.
This ABS/ESP module ensures the stability of the car, shortens the braking distance during emergency braking and actively regulates the pressure in the brake system. Typical symptoms of a defect in the original unit are the lighting of the ABS/ESP lights, error codes of the pump or pressure sensors and limited function of the brake assistants. By replacing it with a correctly matched part according to the module number, these problems are reliably eliminated.
Assembly: always disconnect the battery before disassembly. After the mechanical replacement and reconnection of the brake pipes, it is necessary to bleed the system correctly (ideally with the help of diagnostics – service function for bleeding ABS/ESP) and perform the basic settings/telecoding of the unit according to the car’s equipment. Calibrating the steering wheel angle sensor and checking the wheel sensors is recommended. DiagBox/PP2000/Lexia diagnostics are suitable for PSA cars.
Always verify compatibility against part codes and connector designs. For ABS/ESP, matching the numbers of Bosch and PSA and the same arrangement of the brake outlets is essential. This piece is intended especially for the first generation Peugeot 3008/5008 with corresponding equipment.
Technical information
- Manufacturer: Bosch (ABS/ESP control unit + hydraulic block)
- Model: Peugeot 3008 I (T84), Peugeot 5008 I (T87); typically years of production 2009-2016 – check compliance according to the codes
- Product codes: Bosch 0265951325, 0265230879
- Other numbers: PSA 9666848380, 9664532380, 4541.NQ, 4541.NR, 1607510480
A used original Bosch part offers a quality and cost-effective solution compared to a new unit. If your vehicle is reporting ABS/ESP errors and the numbers on the plate match, this unit is a good candidate for replacement. For trouble-free installation, we recommend installation by an experienced mechanic and subsequent adjustment via diagnostics.
