Description
ATE ABS pump and control module compatible with Citroën C3 II and Peugeot 207. This ABS hydraulic unit with integrated control electronics was removed from a Peugeot 207 1.4 16V and includes a section of the wiring harness. Ideal for professional workshops and skilled DIY mechanics seeking correct fit by part number.
The ABS pump maintains hydraulic pressure during anti-lock braking events, modulating brake pressure rapidly to prevent wheel lock-up under heavy braking. The pump motor, valves and electronic module cooperate with wheel speed sensors and the vehicle ECU to ensure safe braking stability.
Common failure modes include electrical connector corrosion, pump motor wear, internal valve sticking, water ingress and faults in the control electronics. Failures are more likely on higher-mileage vehicles; typical issues frequently appear after 100,000–200,000 km depending on use and environment.
Replacement notes: Disconnect the battery before starting. Safely lift and support the vehicle, remove relevant wheels and gain access to the ABS unit. Unplug the electrical connector, undo brake line fittings and mounting bolts, then remove the ABS unit. Install the replacement in reverse order, tighten connections to manufacturer torque settings and bleed the brake system thoroughly. ABS system bleeding with a diagnostic tool is recommended to clear fault codes and perform pump priming. Observe safety precautions when handling brake fluid and follow vehicle-specific procedures.
Technical Information
- Manufacturer: ATE
- Model: Citroën C3 II; Peugeot 207 (example fitment: Peugeot 207 1.4 16V)
- Product Codes: 9662150680; 10.0207-0077.4; 10.0970-1126.3
- Other Numbers: 4541FX; 4541FY; 4542N1; 4542N2
Searchable by part number 9662150680 and the alternative codes listed above. Compatibility must be checked against the vehicle VIN and wiring harness version. If in doubt, consult vehicle-specific fitment data or contact a parts specialist.
