Description
Driver Side Sun Visor For Citroën Xsara Picasso And Peugeot 307. This Is A Used Part – Possible Slight Soiling.
Product Overview
Replacement driver side sun visor designed for Citroën Xsara Picasso and Peugeot 307 models. The sun visor reduces driver glare, improves comfort on bright days and contributes to interior aesthetics. Supplied as a used part; minor marks or light soiling may be present which does not affect function. Ideal choice for mechanics or DIY enthusiasts who need a direct-fit, cost-effective replacement part.
Fitment
Fits the following models:
- Citroën Xsara Picasso
- Peugeot 307
Note: This is the Driver Side (Left) Sun Visor for left-hand drive vehicles. Compatibility is typically by model and interior trim; check the mounting pattern and connector type before fitting.
Technical Information
- Manufacturer: Citroën / Peugeot (Stellantis)
- Model: Xsara Picasso, 307
- Product Codes: 8143LW
- Other Numbers: NFP (as marked)
Installation Recommendations
Recommended tools: Phillips or Torx screwdriver set, plastic trim tools, and a flashlight. Typical replacement steps:
- Carefully pry off any plastic end caps covering the mounting screws using a trim tool to avoid damage to the headliner.
- Unscrew the visor mounting screws and support bracket screws. Keep hardware for reuse if undamaged.
- If the visor has an illuminated vanity mirror, locate and gently disconnect the electrical connector. For safety, consider isolating the circuit or disconnecting the battery before disconnecting electrical connectors to prevent short circuits.
- Remove the old visor and fit the replacement, ensuring the pivot and retaining clips engage correctly.
- Reinstall screws and caps, test mirror illumination (if present) and the mechanical movement to ensure smooth operation.
Final Checks: Ensure the visor locks securely into its stowed position and does not obstruct vision. Replace any broken clips or worn screws to guarantee a secure fit.
Why This Part Fails Most Often
- Mechanical Wear: Repeated flipping and rotation cause the pivot or spring mechanism to weaken or break.
- Clip And Mount Failure: Plastic mounting clips or bracket tabs become brittle with age and can snap during use or removal.
- Sun And Heat Damage: Prolonged UV exposure degrades upholstery, causes discoloration or weakening of materials.
- Moisture And Corrosion: In visors with electrical illumination, connector corrosion or damaged wiring can cause loss of function.
- Physical Impact: Doors slammed with the visor down or accidental impact can deform the visor or break mounting points.
Pre-Installation Inspection
Before fitting a used visor, inspect the following:
- Pivot and hinge condition: Ensure springs and pins are intact and operate smoothly.
- Mounting holes and clips: Check for cracks or elongated holes that would prevent secure mounting.
- Upholstery and stitching: Look for heavy wear, tears or stains that may affect appearance.
- Electrical connectors (if present): Verify pins are clean and free of corrosion; wiring insulation should be intact.
Why Buy This Used Part
Using a genuine used sun visor is a cost-effective way to restore function and interior appearance while maintaining original fitment and finish. Suitable for professional workshops and experienced DIYers looking for a direct replacement without aftermarket modification.
