Description
Right bulb holder for the rear right lamp for PEUGEOT 308 HATCHBACK. Supplied with a short length of wiring – without sealing grommet.
Direct-fit replacement socket for the right rear tail light on Peugeot 308 Hatchback models. Frequently searched by product code 1606959180, this part is aimed at professional technicians and competent DIYers who need a reliable, straightforward solution to restore rear-light functionality. The unit replaces worn or damaged lamp holders and ensures stable electrical contact for brake, tail and indicator circuits when installed correctly.
Product Overview
This bulb holder assembly secures the rear-right lamp bulbs in the lamp housing and provides the electrical connection to the vehicle wiring. Supplied with a short piece of cable, the part does not include the rubber sealing grommet, so attention to sealing and moisture protection is required during installation. The design matches the original fitment for the right-hand rear lamp cluster on Peugeot 308 Hatchback vehicles.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 308 Hatchback
- Product Codes: 1606959180
- Additional Numbers: No further reference numbers available
Fitment And Replacement
Fits: Right Rear Lamp – Peugeot 308 Hatchback. When replacing the socket, follow this general procedure:
- Disconnect the vehicle battery before starting work to avoid short circuits.
- Remove the interior trim or access panel in the boot to reach the lamp cluster fasteners.
- Unscrew or unclip the lamp cluster and carefully pull it out to access the bulb holder.
- Release the old holder from the lamp housing (usually a twist-and-pull or clip release), disconnect the wiring, and remove the damaged socket.
- Install the new socket, connect the wiring, insert bulbs and test all functions (tail, brake, indicator) before refitting the cluster.
- Reassemble the lamp cluster and interior trim, ensuring all seals and fasteners are correctly refitted.
Common Failure Modes
- Corrosion of electrical contacts due to moisture ingress, especially if the sealing grommet is missing or damaged.
- Plastic deformation or melting from overheated bulbs or poor contact, causing intermittent or lost connection.
- Broken or brittle mounting clips and cracked housing after years of vibration and thermal cycling.
- Damaged wiring or connector pins from chafing or improper previous repairs.
Installation Recommendations
- Use a new rubber sealing grommet or appropriate silicone sealant to restore the lamp housing waterproofing, since the part is supplied without a grommet.
- Apply a small amount of dielectric grease to the electrical contacts to reduce corrosion and improve conductivity.
- Check bulbs for correct type and condition before reinstalling the holder; a failing bulb can overheat the socket.
- Test all lamp functions after connecting the new holder and before final reassembly to avoid repeated disassembly.
- Secure any loose wiring and ensure correct routing to prevent chafing or stress on the connector.
Search Tip: Many customers locate this part by the product code 1606959180. Use that number when searching parts catalogs for quick identification.
