Description
Right rear lamp Citroen Xsara Estate
Balle with a bulb can be purchased in our country
Original right rear light (rear lamp) for Citroën Xsara combi (break) with OE code 6351J8. The ideal replacement for a cracked, foggy or broken light – retain the original appearance and the correct geometry. This is the original removal part used, suitable for car mechanics and home repairers who need a quick and reliable solution.
The
part is designed for the right side of the car (passenger side at the steering wheel on the left). It corresponds to the original design – fits in serial handles and uses the original type of connector and sockets. Thanks to the same OE code 6351J8 you can achieve trouble -free mounting and proper function of light circuits.
Package content: rear lamp without socket and bulbs. The bolt base can be purchased in our country, which will facilitate replacement and shorten the repair time. Before mounting, we recommend checking the status of the seals and cleanliness of the bearing surfaces to avoid leaking into the lamp.
Typical reasons for replacement: mechanical damage after less collision, cracks after plastic aging, water root and subsequent corrosion of contacts, non -functional directional/brake/reverse. Inadequate rear light is a frequent reason for unsuccessful technical inspection, so timely replacement is also suitable for safety and legislation.
technical information
Manufacturer: Citroën (PSA)
Model: Citroën Xsara Estate (Break), Right side
product codes: 6351J8, 6351.J8
More Numbers: PSA NFP (No Further Production)
How to verify compatibility: The most reliable is to compare the OE number on the original episode or in the VIN catalog. If 6351J8 sits, the part is designed for your car. In case of doubt, always follow the part number, because there may be minor deviations according to the year of production or equipment.
Installation tips for replacement: Open the luggage compartment lid, remove the cap and loosen the fastening nuts/screws of the lamp, disconnect the electric connector and remove the old lamp. Transfer the bolt base (if you do not put it new), check the seals, sett down a new lamp into the body, evenly tighten the screws and test all the light functions (outline, brake, rudder, fog/reverse according to the equipment).
