Description
Right-Hand Exterior Mirror For CITROËN C3 From 2009–2016. Color KGW – Belle-Île Blue Paint. Electrically Adjustable, Heated, With Temperature Sensor. 7-Pin Connector (5+2).
This genuine-style right-hand exterior mirror is designed for Citroën C3 II (2009–2016) owners and professional technicians who need a direct-fit replacement. The mirror comes in KGW Belle-Île blue and includes electric adjustment, glass heating and an integrated temperature sensor for accurate climate-related functions. The 7-pin (5+2) electrical connector supports motorized adjustment, heating and sensor signals, which makes this unit a practical swap for vehicles originally equipped with the same connector layout and features. Ideal for fast replacement in workshops or for confident DIY repairs, the mirror restores original functionality and exterior appearance while keeping essential features intact.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Citroën C3 II (2009–2016)
- Product Codes: KGWD 8154AR
- Other Numbers: Not Provided
Function And Compatibility
The unit Provides Electric Adjustment For Mirror Position, Heated Glass To Reduce Fogging And Ice Build-Up, And A Temperature Sensor That Feeds Climate/Control Systems Where Applicable. Compatibility Is Intended For Citroën C3 II Body Variants Produced Between 2009 And 2016 That Use A 7-Pin (5+2) Mirror Connector And Were Factory-Fitted With These Features. Always Verify Connector Pinout And Feature Set Before Installation To Ensure Full Functionality.
Installation Recommendations
- Remove Interior Door Trim Carefully To Access Mirror Mounting Bolts And Electrical Connector.
- Disconnect The Mirror Connector Before Unscrewing The Mounting Bolts. If Possible, Disconnect The Negative Battery Terminal To Reduce Risk Of Short Circuits When Working On Vehicle Electricals.
- Support The Mirror During Removal To Avoid Dropping And Damaging The Glass Or Paintwork.
- Before Final Assembly, Connect The Mirror Temporarily And Test Motor Functions, Heating Element, And Sensor Output To Confirm Correct Operation.
- Use New Fasteners Or Torque To Manufacturer Recommendations Where Available. Ensure A Proper Seal Between Mirror Base And Door To Prevent Water Ingress.
- Apply A Small Amount Of Dielectric Grease To Electrical Connectors To Improve Corrosion Resistance In The Long Term.
How The Part Is Replaced
Typical Replacement Involves Removing The Inner Door Trim Panel, Disconnecting The 7-Pin Electrical Connector, Unbolting The Mirror From The Door, And Fitting The Replacement Unit In Reverse Order. Testing Of Electric Adjustment, Heated Glass, And Temperature Sensor Should Be Performed Before Reassembling The Door Trim.
Most Common Failure Reasons
- Impact Damage From Collisions Or Parking Incidents Leading To Broken Housing Or Glass.
- Water Ingress Causing Corrosion Of Connectors Or Failure Of The Motor/Heating Elements.
- Wear Of The Internal Adjustment Motor Or Gear Mechanism After Years Of Use.
- Electrical Faults In Wiring Or Corroded Pins Which Prevent Heating Or Sensor Signals From Passing Correctly.
- Cracked Or Damaged Glass From Stones Or Vandalism.
This mirror Is A Direct Option For Restoring Full Functionality On Affected Vehicles. For Workshop Use, Keep The Product Code (KGWD 8154AR) Handy To Speed Up Parts Identification And Ordering.
