Description
Shifter rods – cables for CITROEN C1 PEUGEOT 107 cars
Gear shift rods (cables) for Citroën C1 and Peugeot 107 cars are a key part of manual transmission control. They transmit the movement of the gear lever to the shift mechanism on the transmission, so they have a direct effect on the accuracy, ease and certainty of shifting gears. Product numbers are often used in searches, so we list them below in the description.
The part is intended for PSA group cars and is typically used for problems such as difficult shifting, inaccurate shift lever guidance, a problem with engaging some gears or a “rubbery”/unclear shift action.
Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: Citroën C1, Peugeot 107
Product codes: 3820-0H010, 2444AT
Other numbers: 1637133880
Part Type: Shift Rods / Shift Cables (Transmission Control)
Purpose: manual shifting (shift mechanism)
Installation recommendations:
– Before assembly, compare the design of cable guides and terminations (grips/joints) with the original part, including routing and length.
– Check the condition of the ball pins, bushings and holders on the transmission and on the shift lever; an excessively squeezed bearing can cause inaccurate shifting even after the rods have been replaced.
– Make sure the cables are routed correctly without sharp bends and without contact with hot parts (exhaust, catalytic converter) or moving parts.
– After assembly, verify smooth shifting of all gears with the engine off and running; if part of the adjustment system, perform it according to the procedure for the type.
The reason why the part most often goes wrong:
The most common cause is wear and play in the joints/ends of the tie rods, possibly stiffening or damage to the cable due to dirt and corrosion. The problem can also be accelerated by incorrect routing of the tie rod (breakage, friction) or long-term stress when shifting “over resistance” (e.g. with a faulty clutch or poorly adjusted shifting).
