Description
Right Rear Reversing Light For CITROËN C4 First Series With Bulb Holder And Bulb
Upgrade or replace the right rear reversing light on your Citroën C4 first generation with this direct-fit unit. Designed to restore proper rear illumination and maintain safety when reversing, this assembly includes the socket and a fitted bulb for immediate installation. Ideal for professional mechanics and experienced DIYers who search by OEM codes, this part matches common Citroën references to ensure easy identification and fast service.
Product Overview
This right-hand reversing (backup) lamp is an OE-fit style replacement for the Citroën C4 (first generation). The lamp’s role is to provide bright, white illumination to signal reversing maneuvers and improve visibility behind the vehicle in low-light conditions. The assembly includes the bulb holder and the bulb, reducing the time spent sourcing additional components.
Compatibility
Fits Citroën C4 First Generation (C4 I). Customers commonly search using part numbers, so the product is listed under the OE references below. Always verify the part number against the unit being replaced to ensure compatibility.
How To Replace
Typical replacement steps (general guidance for experienced mechanics and competent DIYers):
- Open the boot and remove or fold back the interior trim panel to access the rear lamp cluster mounting points.
- Remove the retaining screws or nuts securing the lamp to the body.
- Carefully pull the lamp assembly outward to expose the electrical connector.
- Disconnect the wiring connector, then twist and remove the bulb holder from the lamp if required.
- Install the new lamp assembly, connect the wiring, secure the unit with fasteners, and refit the trim panel.
- Verify operation of the reversing light before finishing.
Installation Recommendations
Disconnect the negative battery terminal before starting work to avoid short circuits or accidental activation. Use appropriate trim tools to avoid damaging interior panels and apply moderate torque to fasteners—plastic retainers can be fragile on older vehicles. After installation, check the lamp operation and that seals sit correctly to prevent water ingress.
Why The Part Fails
The most common causes of reversing light failure are bulb burnout, corroded contacts in the socket, water ingress through damaged seals, and physical damage from rear impacts. Bulbs typically fail before the lamp housing; however, housing damage or cracked lenses allow moisture entry, which accelerates electrical corrosion and connector failure.
Technical Information
- Manufacturer: Stellantis / Citroën
- Model: Citroën C4 First Generation (C4 I)
- Product Codes: 9652464580, 9651205380, 6351V1
- Other Numbers: Listed OE references and aftermarket cross-references commonly use the codes above
Notes For Professionals
This unit is suitable for fast, reliable replacement during routine lamp or body repairs. Because customers often search by OE number, the included product codes increase findability in parts databases and e-commerce searches.
