Description
Right rear lamp for Peugeot 206 Combi without bulb sockets. The bulb holder with bulbs and a short length of wiring can be purchased separately under code 6351R4.
Overview
This right rear lamp is a direct-fit replacement for the outer rear light on Peugeot 206 Combi (Estate/SW). Supplied without the bulb holder, it restores the rear styling and light functions when fitted with the correct socket and bulbs. The assembly is commonly searched by the part number 9641540577, which helps ensure fast identification for professional workshops and home mechanics.
Fitment
Compatible With: Peugeot 206 Combi (Estate / SW). Check the part number 9641540577 when searching for exact matches. The separate bulb holder and short wiring harness are available under code 6351R4.
Function And Description
This rear lamp forms the outer right section of the rear light cluster and accommodates standard bulb sockets (sold separately). When properly equipped with the bulb holder, it provides tail/position light, brake light and indicator functions as required by the original factory assembly. The unit includes the lamp lens and housing designed to match factory mounting points for a secure fit.
How To Replace
- Open the tailgate and remove the interior trim or access panel to reveal the lamp retaining nuts.
- Unscrew the retaining nuts/bolts and carefully pull the lamp assembly slightly outwards.
- Unplug the electrical connector. If the unit has a separate bulb holder, remove it first (note: this listing is for the lamp shell only).
- Fit the new lamp assembly, align it with the mounting pins and tighten the retaining nuts evenly.
- Install the bulb holder and bulbs (code 6351R4 if using the matching accessory), reconnect the electrical connector and test all light functions (tail, brake, indicator).
- Refit interior trim and check the fit and seal to prevent water ingress.
Recommended Maintenance
Inspect seals and bulb sockets during lamp replacement. Replace corroded sockets or damaged rubber gaskets to prevent moisture ingress. Regularly check lamp function and lens condition; damaged or hazed lenses reduce light output and should be replaced to maintain safety and legal visibility.
Why This Part Commonly Fails
Common failure causes include impact damage from minor collisions, cracked or scratched lenses, water ingress leading to corrosion of contacts or sockets, and degraded seals. Electrical faults in the socket or wiring can also cause intermittent or complete failure of the lamp functions. Addressing seals and socket condition at replacement increases service life.
Technical Information
- Manufacturer: Peugeot (Stellantis)
- Model: Peugeot 206 Combi (Estate / SW)
- Product Codes: 9641540577, 6351R4
- Additional Numbers: 6351R4 (bulb holder and short wiring harness accessory)
Installation Recommendations
Work with the ignition off and ensure the vehicle electrical system is inactive before disconnecting connectors. Handle the lamp carefully to avoid scratching the lens. Replace any cracked seals or corroded bulb sockets during installation. After fitting, verify all light functions from the rear of the vehicle and adjust alignment if needed. Use genuine-style bulbs and the correct holder (code 6351R4) for reliable operation.
Notes For Professionals And DIYers
Part number searches for 9641540577 will quickly locate this lamp. This product is intended for direct replacement of the right outer rear lamp on Peugeot 206 Combi models; confirm visual match with the existing unit before fitment. For best results, inspect surrounding bodywork and wiring when replacing the lamp to prevent recurrent failures.
