Description
Left Bulb Socket For Rear Lamp Peugeot 308 Hatchback With A Section Of Wiring – Without Sealing Grommet
High-quality replacement left bulb socket designed for the rear lamp of the Peugeot 308 Hatchback. The part includes a short length of wiring for an easy plug-in connection but does not include the rubber sealing grommet. Ideal for mechanics and DIY enthusiasts needing a direct-fit electrical holder for tail, brake or indicator bulbs. Often searched under the product code 1606959280.
Function And Application
The bulb socket secures the lamp bulb in the rear light cluster and provides the electrical contacts required for lighting functions (tail, brake, or turn signal depending on the bulb installed). This component is a wear item in the lamp assembly and is essential for a safe, reliable electrical connection and correct lamp operation.
Suitable Models
Fits: Peugeot 308 (Hatchback) — left rear lamp socket. Confirm fitment by matching the shape and product code 1606959280 when replacing the part.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 308 Hatchback
- Product Codes: 1606959280
- Additional Numbers: N/A
Replacement Procedure (Overview)
Recommended for trained technicians and competent DIYers. Typical replacement steps:
- Open the boot and remove the light cluster access panel or interior trim to reach the rear lamp assembly.
- Remove the retaining screws or nuts securing the lamp unit to the body and gently pull the lamp assembly outwards.
- Disconnect the main lamp connector and remove the faulty bulb socket from the lamp holder by turning or unclipping, depending on the lamp design.
- Install the new socket, connect the wiring harness section supplied, and check secure seating of electrical contacts.
- Test all lighting functions before refitting the lamp assembly. Reinstall the lamp, fasteners and trim in reverse order.
Installation Recommendations
- Always work on a cool lamp assembly to avoid burns and prevent damage to soft plastics and connectors.
- Clean the lamp socket area and mating contacts from corrosion or dirt before fitting the new socket to ensure reliable conductivity.
- Use dielectric grease on terminals if exposed to moisture-prone environments to reduce future corrosion.
- Ensure correct bulb type and orientation when reinstalling. Tighten fasteners to manufacturer torque values where specified.
- Disconnecting the negative battery terminal is recommended when performing electrical repairs to reduce the risk of short circuits; follow standard workshop safety procedures.
Most Common Reasons For Failure
Bulb sockets typically fail due to thermal stress from repeated bulb heating, corrosion of contacts from moisture ingress (especially if the rubber grommet or sealing is missing or degraded), mechanical wear or damage during bulb changes, and electrical arcing caused by loose connections. Lack of a sealing grommet increases the risk of water and dirt ingress, accelerating contact corrosion and failure.
Why Choose This Part
This direct-replacement socket provides a quick repair solution for a non-functioning left rear lamp connection on the Peugeot 308 Hatchback. It saves time by including a length of wiring for easier reconnection and is suitable for workshop repairs or home maintenance when the original socket is corroded, broken or has poor electrical contact.
