Description
Socket For Left Rear Lamp With Wiring Harness For PEUGEOT 206 3/5 Door Up To 06/2003. Includes A Section Of Wiring. Driver Side. Not Rusted Or Heat-Damaged, Fully Functional, Functionality Of The Bulbs Not Guaranteed.
This left rear lamp socket with attached wiring harness is a practical replacement part for Peugeot 206 owners and professional technicians. Supplied with a length of cable and ready to fit into the original tail lamp assembly, this component restores reliable electrical contact for stop, tail, and indicator bulbs on the driver side. Ideal for backyard mechanics and workshop use, the part is commonly searched by product code 6350P1, increasing discoverability for quick repairs.
Features And Benefits
- Direct Fit For Peugeot 206 3-Door And 5-Door Models Up To June 2003.
- Included Wiring Section Simplifies Reconnection When Original Wiring Is Damaged.
- Driver Side (Left) Tail Lamp Socket Designed To Mate With Original Bulb Holders.
- Part Number Reference: 6350P1 — Useful For Fast Lookup In Catalogs And Search Engines.
- Useful For Replacing Corroded Or Heat-Damaged Sockets Without Replacing Entire Lamp Unit.
How The Part Works
The socket secures the rear lamp bulbs and provides the electrical contacts that transmit power to tail, stop, and turn signal lamps. The attached wiring harness delivers those signals back to the vehicle wiring loom. Proper contact pressure and corrosion-free terminals are critical for consistent lamp operation and to avoid intermittent faults or flickering.
Replacement Procedure
- Disconnect Battery Before Starting Work To Prevent Short Circuits.
- Open The Tailgate/Boot And Remove Interior Trim Or Access Panel To Reach The Rear Lamp Assembly.
- Unscrew Or Unclip The Tail Lamp Unit From The Body (Typically Two Or Three Fixings Depending On Body Type).
- Release The Old Socket By Twisting Or Releasing Retaining Clips And Unplug The Loom Connector.
- Install The New Socket (Ensure Correct Orientation), Connect The Wiring Harness And Secure All Clips/Clamps.
- Test All Functions (Tail, Brake, Indicator, Reverse If Applicable) Before Reassembling Trim.
- Reassemble Trim And Reconnect The Battery.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 206 3-Door And 5-Door (Manufactured Up To June 2003)
- Product Codes: 6350P1
- Other Numbers: N/A
Installation Recommendations
Always Follow Basic Safety Procedures: Disconnect The Battery Before Removing The Tail Lamp Assembly. Inspect The Vehicle Wiring Loom For Signs Of Heat Damage Or Chafing And Repair Any Compromised Sections Before Installing The New Socket. Use Dielectric Grease On Contacts To Reduce Future Corrosion Where Appropriate. Tighten Fasteners To Manufacturer Torque Settings And Ensure All Clips Are Fully Engaged To Prevent Water Intrusion.
Most Common Failure Reasons
Socket Failures Are Typically Caused By Corrosion Due To Water Ingress, Heat Damage From Overheating Bulbs, Mechanical Wear From Vibration, Or Poor Electrical Contact From Oxidation. Faulty Ground Connections And Loose Plugs Also Produce Intermittent Function Or Total Loss Of One Or More Lamp Functions. Regular Inspection During Scheduled Maintenance Helps Prevent Sudden Failures.
Compatibility And Notes
Designed For Driver Side Rear Lamp On Peugeot 206 Hatchback Body Styles With Production Dates Up To 06/2003. Confirm Fitment By Matching The Shape And Connector Type To Your Existing Assembly. The Part Is Supplied With A Piece Of Wiring; Bulbs Are Not Included And Their Functionality Is Not Guaranteed.
