Description
Left Rear Light For Citroën C-Elysée. Original Unit With Lamp Housing.
This left rear light is a direct-fit replacement designed for Citroën C-Elysée models and is also compatible with Peugeot 301 variants that share the same rear light assembly. As an original equipment style unit with complete lamp housing, it restores proper sealing, optical performance and appearance after impact damage, cracked lenses or degraded housings. Commonly searched by OE numbers, this part helps workshops and DIY mechanics quickly find the correct taillight for fast repair.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C-Elysée; Peugeot 301
- Product Codes: 9674809080, 9678544480
- Other Numbers: Not Available
Fitment And Function
The left rear light provides stop, tail, indicator and reverse lighting functions (depending on vehicle specification). The assembly includes the lamp housing and mounting points; depending on the vehicle equipment level the unit may contain integrated bulbs or LED modules. It restores correct light output, beam shape and rear-end appearance while maintaining the factory mounting geometry.
How To Replace
- Open the boot and remove the luggage compartment trim to access the rear of the lamp.
- Disconnect the electrical connector from the lamp (release the locking tab) and remove any bulb holders if applicable.
- Unscrew the mounting fasteners (typically 2–3 bolts or screws) securing the lamp to the body.
- Pull the lamp assembly out gently, taking care not to damage clips or the body paint.
- Fit the new lamp into position, secure the fasteners to the correct seating, reconnect the electrical connector and reassemble the trim.
Typical replacement time: 20–40 minutes for an experienced technician. Required tools: Torx/Philips screwdrivers or socket set (depending on fasteners), trim removal tool, gloves.
Installation Recommendations
- Verify that mounting tabs and seals are intact before fitting; replace any damaged clips or gaskets to ensure a watertight seal.
- Check electrical connector contacts for corrosion and clean if necessary to ensure reliable contact.
- When replacing, align the lamp carefully to avoid paint damage and tighten fasteners evenly so the housing seats correctly.
- If the assembly contains replaceable bulbs, test all lamp functions (stop, tail, indicator, reverse) after installation.
Why This Part Fails Most Often
- Impact Damage: Rear-end collisions or minor parking knocks frequently crack the lens or break the housing.
- Water Ingress: Failed seals or degraded gaskets allow moisture to enter, causing condensation, corrosion and electrical faults.
- Connector Corrosion: Exposure to road salt and moisture can corrode pins, leading to intermittent or complete loss of function.
- Bulb Or LED Failure: Burnt-out bulbs or failed LED modules reduce or eliminate specific lighting functions.
- UV And Ageing: Prolonged UV exposure can make the lens brittle or discolored, affecting light output and appearance.
For workshops and DIY mechanics searching by OE number, the listed product codes make it easy to find the correct left rear light for Citroën C-Elysée and compatible Peugeot 301 vehicles. Replace damaged units promptly to maintain safety, legality and vehicle aesthetics.
