Interior mirror Citroën Peugeot 8148XK

Description

Interior rearview mirror for PEUGEOT 206 cars with rain sensor

Part description

This used car part is a suitable choice for repairing or replacing a damaged original element of the car’s interior. The interior mirror is an important part for a safe view from the vehicle, and in this version it is equipped with a rain sensor, which is essential information when choosing the right part.

The part is intended for the Peugeot 206 and is also searched by the product designation 8148XK. When replacing, it is important to compare not only the shape of the mirror itself, but also the design of the attachment, connector and subsequent parts.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 206
• Other numbers: 8148XK

Product codes

• Product codes: 8148XK
• Models: Peugeot 206

Installation recommendations

Generally/typically for this type of part, the exact replacement procedure may vary depending on the specific design of the car and the type of mirror attachment. For the version with a rain sensor, care must be taken when handling the electrical connection and related parts.

1) Before assembly

• Check whether the shape of the mirror, the type of holder and the method of attachment to the glass or to the mounting element match.
• Compare the connector, wiring length and sensor location with the old part.
• Check the condition of the plastic parts, the holder and the mirror element itself.
• Inspect the used part for a cracked cover, damaged wiring, or loose fasteners.

2) Necessary tools and materials

• Common hand tools
• Plastic pry bar for removing interior covers
• Clean cloth
• Preparation for gentle cleaning of contact surfaces as needed
• Protective gloves

3) Step-by-step assembly procedure

1. Park the vehicle in a safe place and turn off the ignition.
2. It is generally recommended to disconnect the battery, especially when working with electrical connections indoors.
3. Carefully remove any plastic covers around the mirror and sensor.
4. Disconnect the electrical connector of the old mirror so as not to damage the latches or wires.
5. Release the old mirror from the holder or mounting base as appropriate for the design.
6. Compare the original and new part side by side, especially the mounting, connector and design of the rain sensor.
7. Clean the bearing or mounting surface of dirt and check its condition.
8. Place the new mirror in the correct position and carefully seat it into the holder without using excessive force.
9. Connect the electrical connector and verify that it is properly secured.
10. Reinstall all the removed interior covers.
11. Restore power to the vehicle if it was disconnected.
12. Check the stability of the mirror and its possibility of correct adjustment.
• 4) Post-assembly checks and test drive/function verification
  • Verify that the mirror holds firmly and does not come loose during normal handling.
  • Check for correct rear view and position adjustment option.
  • Check that there are no leaks after assembly and that the covers fit correctly.
  • For models with a rain sensor, check that the connection is undamaged and everything is properly fitted.

  5) The most common assembly mistakes + how to avoid them

  • Exchanging a part according to appearance – always compare the connector, holder and sensor design.
  • Damage to plastic covers – use appropriate plastic tools and do not use force.
  • Insufficient seat of the mirror – after installation, check the strength of the attachment before driving.
  • Damage to the connector or wiring – disconnect and connect the connector carefully, without pulling on the wires.
  • Assembly without checking the condition of the used part – before installation, check whether the part is mechanically damaged.

  Reasons why the part is damaged

  • Mechanical damage due to careless handling or disassembly
  • Cracking or loosening of the holder due to the age of the material
  • Damage to electrical connection or connector
  • Vibration and long-term stress during vehicle operation
  • Damage after an impact, a sudden slamming of the door or an intervention in the interior