Description
Overview
This ABS/ESP ECU with integrated pump and control module is compatible with Peugeot 206 1.6 HDi (80 kW). Supplied with the wiring harness, the unit carries original PSA part numbers and is designed as a direct replacement for the vehicle's anti-lock braking and electronic stability control functions.
Function
The module monitors wheel speed sensors and other vehicle inputs and controls hydraulic pressure via the pump and valve block to deliver ABS and ESP interventions. Proper operation is essential for safe braking performance and stability control during emergency maneuvers or low-traction conditions.
Compatibility And Fitment
Intended Fitment: Peugeot 206 1.6 HDi (80 kW). Before ordering, always verify the part number on your existing unit or vehicle VIN to ensure exact compatibility. The product is commonly referenced under the part numbers listed below.
Replacement And Installation
Typical replacement procedure for experienced technicians or skilled DIYers: secure the vehicle and disconnect the battery negative terminal, access the ABS/ESP module (usually in the engine bay near the brake master cylinder), disconnect electrical connectors and brake lines (prepare to capture brake fluid), unbolt the unit and remove. Install the new unit in reverse order, tighten fittings to manufacturer torque specifications, perform a full brake fluid bleed, and reset or initialize the ABS/ESP system using an appropriate diagnostic tool. If unsure, have installation completed by a qualified mechanic to ensure brake system safety.
Common Failure Modes
Failures typically result from internal pump wear, contamination in the hydraulic block, corrosion or damage to electrical connectors, or electronic faults within the control unit. Symptoms can include illuminated ABS/ESP warning lamps, reduced braking performance, unusual brake pedal feel, or loss of ABS/ESP function. Addressing issues promptly prevents compromised vehicle safety.
Technical Information
- Manufacturer: PSA Citro&ebn;en Peugeot
- Model: Peugeot 206 1.6 HDi 80 kW
- Product Codes: 9655960880, 4541V7, 4542K0
- Other Numbers: 10.960-1151.3, 10.0206-0194.4
Supplied with wiring harness. Always cross-check fitment by part number before purchase. Suitable for professional garages and competent DIY installers familiar with brake hydraulics and ABS diagnostics.
