Description
Spare wheel carrier for CITROËN C8 and PEUGEOT 807. May have a different wheel attachment type than shown in the photo, but fully compatible. Fully functional – tested.
This OEM-used spare wheel carrier is a direct-fit replacement for Citroën C8 and Peugeot 807 models. Designed to securely hold the spare wheel beneath the vehicle, it is supplied with the original mounting points and is compatible with the common attachment variants used on these models. Ideal for professional workshops and knowledgeable DIYers who search by part number (96481316YR, 9648235680, 9649104080, 7603R4, 9663376077, 7603S0) to ensure fast identification and fitment.
Technical Information
- Manufacturer: Stellantis (Citroën / Peugeot)
- Model: Citroën C8, Peugeot 807
- Product Codes: 96481316YR, 9648235680, 9649104080
- Additional Numbers: 7603R4, 9663376077, 7603S0
Compatibility
Fits Citroën C8 and Peugeot 807 platforms. Although visual details of the wheel attachment (hook, plate or clamp) may vary between batches, the carrier is fully compatible with the OEM mounting points on these models. Always check the part numbers listed above when searching to match the correct variant.
Function
The spare wheel carrier secures the vehicle’s spare wheel under the rear floor, keeping it accessible while saving trunk space. The assembly typically consists of a metal bracket and a winch or cable mechanism to lower and raise the wheel. It must withstand road vibrations, moisture and corrosion while allowing reliable operation when the spare is needed.
Replacement Procedure
- Park the vehicle on level ground and engage the parking brake.
- Remove the spare wheel from the carrier according to the vehicle instructions to relieve tension on the assembly.
- Support the mounting area if necessary and remove the fixing bolts that attach the carrier to the body or chassis.
- Disconnect any cable, hook or retaining hardware and remove the old carrier.
- Transfer any required components (hooks, plates, washers) to the new carrier if not supplied.
- Install the replacement carrier, secure all fasteners and tighten to OEM torque specifications (refer to factory workshop manual).
- Test the lowering/raising mechanism several times with the spare wheel fitted to verify smooth operation and correct alignment.
Installation Recommendations
- Use OEM or high-quality replacement fasteners and new locking washers if originals are corroded.
- Apply anti-seize compound on bolts exposed to road salt to ease future removal.
- Inspect and, if necessary, replace the cable/rope and winch components if they show signs of fraying, corrosion or binding.
- Torque all bolts to the values specified in the vehicle’s workshop manual. If torque values are unknown, consult the repair literature for Citroën/Peugeot C8/807.
- After installation, cycle the carrier several times and perform a road test to check for rattles or movement.
Why The Part Most Often Fails
The most common causes of failure are long-term corrosion from water and road salt, cable wear or fraying, seized winch mechanisms and damage to mounting brackets from impacts or poor previous repairs. Lack of lubrication and neglected inspection accelerate deterioration, especially in regions with heavy winter maintenance where salt is used on roads.
Notes For Buyers
Part numbers and model fitment are included above to help you locate the correct item quickly. Suitable for professional installation or experienced DIYers familiar with underfloor spare wheel systems. As this is an OEM-used unit, verify visual match with your vehicle’s mounting arrangement when possible.
