Description
Backlets to the rear lamp in the fender for Citroën C-Crosser cars
The same for both left and right side
ORIGINAL CABINATION OF LOBERS BULPS IN THE BLAUBLATION FOR CITROëN C – CROSSER, PSA code 621565 (NFP). It is a wiring bundle designed for the internal connection of the rear light located in the fender. The cabling is the same for the left and right side, so it fits both sides of the vehicle.
This part solves typical rear light problems, such as occasional outages, weak lighting or non -functional turn signal/outline light caused by transition resistors, contacts or damaged wires. Replacement of cabling is often the fastest and most reliable way to restore the correct function of lighting and pass the MOT without complications.
The assembly is straightforward: after the battery is disconnected, the rear lamp in the fender (access from the trunk space after removal of upholstery) is removed, the original connector is disconnected, the cable beam is replaced and the contacts and seals are checked. It is recommended to clean the skeletal points, check the condition of the bases of the bulbs and possibly use a contact spray or dielectric petrolatum to prevent corrosion. Do not bend the cabling on the sharp radius and guide it in the original mounts to avoid wire stress.
technical information
manufacturer: dog (Citroën/Peugeot), original part
Model: Citroën C -Crosser (about 2007–2012), rear lamp in the fender, left/right identical
product codes: 621565
Other numbers: 6215.65, 6215 65, NFP (finished production)
Always verify compatibility according to the Part code and by comparing the connector and cable management with your original cabling. Because it is an original dog solution, you maintain the correct connection and reliable function without the need to modify the wiring.
This is the original part used, suitable as a cost -effective replacement for no longer non -functional volume. Code 621565 is kept as NFP in the PSA, so this is an ideal choice for keeping the car in operation with the availability of OEM quality.
