Right Passenger-Side Exterior Mirror ETHC Peugeot 406 8149T1

Description

Right Front Passenger Mirror For PEUGEOT 406. Electrically Adjustable, Heated And With A Temperature Sensor. Color ETHC Grey Metallic. Slightly Scuffed Paint. 7-Pin Connector.

High-quality replacement right passenger side exterior mirror for Peugeot 406, designed for mechanics and competent DIY enthusiasts. This electrically adjustable, heated mirror with integrated temperature sensor restores visibility and comfort in cold or wet conditions. The ETHC grey metallic finish matches factory paint codes and the 7-pin electrical connector ensures full functionality (adjustment, heating, sensor). Ideal when the original mirror is mechanically damaged, the glass is cracked, or the heater/adjuster has failed.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 406
• Product Codes: 8149T1, ETHC
• Other Numbers: 7-Pin Connector

Fitment

Fits Peugeot 406 range (saloon/sedan, estate/break, coupe) — verify part number 8149T1 and connector type (7-pin) for exact compatibility. Matches right passenger (front) side application.

Function And Features

• Electrically Adjustable Mirror Position
• Heating Element To Prevent Fogging And Ice Build-Up
• Integrated Temperature Sensor For Climate-Related Systems
• ETHC Grey Metallic Finish
• 7-Pin Electrical Interface For Full Feature Support

How To Replace

General replacement procedure for a competent technician or DIYer with basic tools:

1. Disconnect The Battery Before Starting To Avoid Short Circuits And Protect Electronics.
2. Remove The Interior Door Trim Or Triangular Cover To Access The Mirror Fasteners And Electrical Connector.
3. Unplug The 7-Pin Connector Carefully; Inspect For Corrosion Or Bent Pins.
4. Unscrew The Mounting Bolts Holding The Mirror To The Door.
5. Remove The Old Mirror Assembly And Install The Replacement In Reverse Order.
6. Reconnect The Connector, Refit Trim, Reconnect The Battery, And Test Adjustment, Heating, And Sensor Functions.

Installation Recommendations

• Always Disconnect The Battery Prior To Removal/Installation To Protect Vehicle Electronics.
• Check The 7-Pin Connector For Clean Contacts; Clean Or Replace Damaged Clips Or Seals To Prevent Water Ingress.
• When Aligning The Mirror, Test Electrical Adjustment And Heating Before Final Reassembly.
• Use Appropriate Trim Tools To Avoid Damaging Door Panels And Clips.

Most Common Failure Reasons

Exterior mirrors typically fail due to mechanical impact (collisions or knocks), wear of the electric adjustment motor, corrosion or breakage of the electrical connector, water ingress causing heater or sensor failure, and cracked or damaged mirror glass. Cosmetic paint scuffs are common from minor impacts or abrasion — this unit has slight scuffing on the paint.

Additional Notes

This unit Is Supplied In ETHC Grey Metallic And Features A 7-Pin Interface (Part Code 8149T1). Verify Connector Type And Function Set Before Installation To Ensure Full Compatibility.