Description
Left rear lamp for Peugeot 206 Combi without bulb holder. The bulb holder with bulbs and a piece of wiring can be purchased separately under code 6350R4.
This genuine-style left rear tail light is designed for Peugeot 206 Combi (estate) models and replaces the external rear lamp assembly on the left side. Constructed to match original fitment points and sealing surfaces, it restores proper tail, stop, indicator and reverse light functions (depending on vehicle wiring and lamp version). The lamp is supplied without the bulb holder/pigtail, so order part code 6350R4 if replacement of the socket and wiring harness is required.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Peugeot 206 Combi (Estate)
- Product Codes: 9641540677, 6350R4
- Additional Numbers: 9641540677 (OE Reference)
Installation Recommendation
- Always work on a cool vehicle and wear protective gloves. Disconnect the negative battery terminal before starting to avoid short circuits and electrical damage.
- Access the lamp from inside the luggage compartment: remove or fold interior trim to reach the retaining screws/clips of the rear lamp assembly. On many Peugeot 206 Combi models the cluster is fastened by screws visible after removing the trim panel.
- Remove retaining screws/clips, carefully pull the lamp body out of the vehicle outer skin taking care not to damage the paint or sealing surfaces.
- Unplug the electrical connector. This lamp is supplied without the bulb holder; if your original holder is damaged, fit the replacement holder (code 6350R4) before refitting.
- Check the sealing surface and apply a light bead of appropriate automotive sealant if the old seal is deteriorated. Refit the new lamp, tighten fasteners to original torque, reconnect the battery and test all light functions (tail, stop, indicator, reverse). Ensure correct alignment and sealing.
Why The Part Most Commonly Fails
- Physical Damage: Impact from minor collisions or loading/unloading in the boot commonly cracks the lens or housing.
- Water Ingress: Deteriorated seals or cracked lenses allow moisture into the lamp, causing corrosion of contacts and electrical faults.
- Socket/Wiring Wear: Vibration and thermal cycling can loosen contacts in the bulb holder or damage wiring; this assembly does not include the bulb holder, so a worn holder must be replaced separately (code 6350R4).
- UV Degradation: Prolonged sun exposure may fade or embrittle the plastic lens and seals, compromising light output and sealing.
Suitable for professional garages and DIY mechanics who require a direct-fit replacement tail lamp for Peugeot 206 Combi. When replacing, ensure you have the correct part codes on hand (9641540677 / 6350R4) to match the vehicle configuration.
