Description
Air Intake For Citroën C1 And Peugeot 107 1.0 1KR With Manual Gearbox And Without ESP
This used air intake assembly is suitable for Citroën C1 and Peugeot 107 models powered by the 1.0 1KR engine with a manual gearbox and without ESP. It restores correct airflow to the engine, helping to recover stable idle, throttle response and fuel economy when the original intake is cracked, leaking or otherwise compromised. Frequently searched by OE codes 17705-0Q010 and 144089, this unit is a direct-fit replacement for professional workshops and DIY mechanics who prefer to order parts by part number.
Key Benefits
- Direct compatibility With Citroën C1 And Peugeot 107 1.0 1KR (manual transmission, no ESP).
- Designed To Accept Original Throttle Body And Engine Sensors, Ensuring Easy Reinstallation.
- Restores Proper Airflow, Reducing Rough Idle, Hesitation And Fault Codes Caused By Vacuum Leaks.
- Ideal For Mechanics And Enthusiasts Searching By OE Numbers 17705-0Q010 Or 144089.
Installation
- Always Disconnect The Battery Before Starting Work And Follow The Manufacturer’S Safety Procedures.
- Remove The Air Filter Box And Associated Ducting To Gain Access To The Intake Assembly.
- Unplug Electrical Connectors And Vacuum Hoses From Sensors And Actuators Attached To The Intake.
- Loosen Clamps And Remove The Throttle Body Or Any Attached Components If Necessary To Free The Intake.
- Undo The Intake Mounting Bolts, Remove The Old Unit And Clean The Mating Surfaces; Replace Any Gaskets Or Seals.
- Install The Replacement Intake, Refit Bolts And Tighten To The Manufacturer’S Specified Torque Values.
- Reconnect Sensors, Hoses And The Throttle Body, Refit The Airbox, Reconnect The Battery And Run The Engine To Check For Leaks Or Fault Codes.
Why This Part Commonly Fails
Plastic Intake Housings On Small 1.0 Engines Are Subject To Heat Cycling And Mechanical Stress, Which Can Lead To Cracks Or Warped Mating Surfaces. Common Failure Modes Include Vacuum Leaks At The Gasket, Broken Mounting Tabs Or Clips, And Cracks Causing Unmetered Air Ingress. Failures Often Appear After Many Years Of Service Or After Thermal/Mechanical Impact. Symptoms Include Rough Idle, Loss Of Power, Increased Fuel Consumption And Engine Management Warning Lights.
Maintenance Tips
- Inspect Intake Seals And Mounting Points During Routine Service To Catch Small Leaks Before They Worsen.
- Check Hoses And Vacuum Lines For Brittleness Or Collapse, As These Will Also Cause Airflow Problems.
- When Replacing The Intake, Always Replace Gaskets Or Seals To Ensure An Airtight Connection.
Technical Information
- Manufacturer: Stellantis / Citroën / Peugeot
- Model: Citroën C1; Peugeot 107 — 1.0 1KR — Manual Transmission — Without ESP
- Product Codes: 17705-0Q010; 144089
- Other Numbers: 144089 (Reference Number)
Recommended For Installation
Fitment Is Straightforward For Experienced Technicians. For Best Results Use Standard Workshop Tools And Follow The Vehicle Manufacturer’S Service Manual For Torque Values And Sequence. After Installation, Clear Any Stored Fault Codes And Confirm Engine Runs Smoothly At Idle And Under Load.
Condition Note
This Is A Used Replacement Part. Condition May Vary; Inspect Mounting Points, Sensor Ports And Sealing Surfaces Before Installation.
