Description
Tachometer for Peugeot 307. Removed from a vehicle with approximately 168,000 km on the odometer.
This instrument is an original Peugeot/Stellantis tachometer intended for Peugeot 307 owners, professional mechanics and DIY enthusiasts who need a direct-fit replacement unit. The cluster displays vehicle speed and engine RPM (where applicable) and is a common replacement part when the original instrument shows faults such as intermittent gauges, dead needles or non‑illuminated displays. The unit is supplied as pictured and retains the mileage shown above.
Key Features And Benefits
- Direct Fit For Peugeot 307 Vehicles (Phase 1 & Phase 2).
- OEM Part Numbers Included For Easy Lookup And Ordering.
- Ideal For Workshop Fitment Or Experienced DIY Replacement.
- Restores Accurate Gauge Readings And Improves Dashboard Usability.
How The Part Functions
The tachometer/instrument cluster converts signals from the vehicle’s engine and speed sensors into readable information on the dashboard. It provides the driver with engine RPM and vehicle speed data, and usually includes warning lights and indicator functions integrated into the cluster housing.
Replacement Procedure
Basic steps for replacing the instrument cluster. These instructions are aimed at experienced technicians and DIYers; follow manufacturer procedures and safety rules.
- Disconnect The Battery Before Starting To Avoid Short Circuits And To Protect Electronic Modules.
- Remove Trim Surrounding The Cluster (Carefully Pry Out Trim Clips To Avoid Damage).
- Unscrew The Mounting Screws Holding The Cluster In Place.
- Pull The Cluster Forward Gently And Unplug All Electrical Connectors.
- Fit The Replacement Unit By Reversing The Removal Steps: Connect Plugs, Secure Screws, Refit Trim, Reconnect Battery.
- Check All Gauges, Warning Lights And Indicator Functions After Installation.
Installation Recommendations
- Always Disconnect The Battery Before Removing The Cluster To Prevent Damage To Electronic Circuits.
- Handle The Unit By The Housing; Avoid Touching The Circuit Board Or Connector Pins.
- Inspect Connectors For Corrosion Or Bent Pins And Clean Contacts If Necessary Before Reinstallation.
- After Fitment, Verify Full Functionality Of Gauges And Warning Lights; Address Any Fault Codes With Appropriate Diagnostic Equipment.
Why This Part Commonly Fails
Instrument clusters in Peugeot 307 models commonly develop faults due to age and wear. Typical causes include:
- Worn Or Failing Stepper Motors Causing Sticking Or Inaccurate Needle Movement.
- Dry Or Cracked Solder Joints On The Circuit Board Resulting In Intermittent Operation.
- Moisture Ingress Or Condensation Leading To Corrosion Of Contacts And Electronic Components.
- Faulty Illumination Or Display Electronics Due To Aged Components.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 307 (Phase 1 & Phase 2)
- Product Codes: 9651299680, P9651299680
- Additional Numbers: 6104ZS, 6105KS, E 01
This listing is focused on matching product codes and compatibility with Peugeot 307 instrument clusters. The unit was removed from a vehicle with the mileage stated above and is supplied as a replacement part for workshops and skilled DIY installers.
