Description
Center Rear Seat Belt for Peugeot 307 and 308 Estate (Kombi/SW)
This center rear seat belt is a direct-fit safety replacement for Peugeot 307 and Peugeot 308 estate models (Kombi / SW). Designed for workshop use and reliable DIY repair, the belt restores passenger restraint performance and meets the original mounting geometry for a safe, secure installation. Commonly searched by product codes 96589932XX, 8974QK and 8975GY, this part is suitable for technicians and competent home mechanics looking for an OE-compatible rear center belt for the luggage-area seat position.
Function And Application
The center rear seat belt secures the middle rear passenger by restraining forward movement during sudden deceleration or impact. It incorporates a retractor mechanism that locks under rapid deceleration and a buckle assembly that secures the occupant. On estate (Kombi/SW) body styles the belt routing and anchorage are designed to fold with the rear seats and integrate with interior trim.
How To Replace
- Park The Vehicle On A Level Surface And Ensure Hands And Tools Are Clean To Avoid Damaging Trim.
- Remove Relevant Interior Trim Panels To Access The Retractor And Lower Anchor Bolt(s).
- Unbolt The Retractor And Lower Anchorage Using The Correct Socket/Drive; Retain Any Spacers Or Washers For Reuse If Intact.
- Route The New Belt Exactly As The Old Unit Was Routed, Ensuring Webbing Is Not Twisted.
- Fit And Hand-Tighten Bolts, Then Torque To The Manufacturer’S Specification (Refer To The Repair Manual For Exact Values).
- Check Retractor Operation: Belt Should Pull Out Smoothly And Retract Without Binding; Perform A Lock Test By Pulling Sharply.
- Refit Interior Trim Panels And Confirm Buckle Engagement And Seat Folding Function.
Installation Recommendations
- Use Original-Style Grade Bolts And Replace Any Fasteners That Show Stretch Or Corrosion.
- Always Follow The Manufacturer’S Torque Specifications And Assembly Sequence From The Repair Manual.
- If The System Includes A Pyrotechnic Pretensioner, Note That Pretensioners Must Be Replaced After Deployment; Treat With Caution.
- Verify That Webbing Is Free Of Twists And That The Retractor Locks When Tested; Do Not Use A Damaged Belt.
- Wear Personal Protective Equipment And Ensure Work Area Is Safe; If In Doubt, Have An Experienced Technician Perform The Replacement.
Why This Part Most Often Fails
Rear center seat belts typically fail or become unusable because of abrasion or fraying of the webbing, contamination or blockage of the retractor mechanism (dirt, debris, or corrosion), damage from previous accidents (including pretensioner deployment), and broken or corroded anchorage bolts. Prolonged exposure to UV, chemical spills, or sharp edges in the trim can accelerate wear. After any collision, the belt assembly should be inspected and replaced if there is any sign of damage.
Replacement Interval And Signs
Replace The Seat Belt Immediately If The Webbing Shows Cuts, Fraying, Heavy Soiling, Or If The Retractor Fails To Lock Or Retract Smoothly. Also Replace After Any Significant Impact Where Restraints Have Been Stressed. There Is No Fixed Mileage Interval; Condition-Based Replacement Is Standard Practice.
Technical Information
- Manufacturer: Stellantis (Peugeot/Citroën)
- Model: Peugeot 307 (Estate / Kombi), Peugeot 308 (Estate / SW)
- Product Codes: 96589932XX
- Additional Numbers: 8974QK, 8975GY
Compatibility Notes
This Belt Is Intended For The Center Rear Seating Position On The Listed Estate Body Styles. Fitment Depends On The Specific Trim And Equipment Level; Confirm Correct Routing And Anchorage Points During Installation.
Final Advice
Use This Replacement To Restore Occupant Safety And Maintain Vehicle Functionality. If You Encounter Unexpected Difficulties During Removal Or Installation—Such As Seized Fasteners Or Hidden Anchors—Consider Professional Assistance To Ensure Safe And Compliant Fitment.
