Description
Front wiper arm for Citroën C1 and Peugeot 107
Product Overview
Durable front wiper arm designed for Citroën C1 and Peugeot 107 (also commonly fitted to Toyota Aygo platform variants). This replacement arm secures the wiper blade to the wiper spindle and transmits motion from the wiper motor and linkage, ensuring clean windshield sweep and correct parking position. Supplied under OE-related codes commonly used in parts searches.
Key Benefits
- Direct Fit: Designed to match OE mounting points and geometry for reliable fitment.
- Professional And DIY Friendly: Suitable for garages and home mechanics — easy to replace with basic tools.
- Improved Contact And Alignment: Restores correct blade contact and parking position when a worn or bent arm is replaced.
Compatibility
Intended For Use On: Citroën C1, Peugeot 107, Toyota Aygo (shared platform models). Always check product codes when searching to match exact variant.
Technical Information
- Manufacturer: Stellantis
- Model: Citroën C1; Peugeot 107; Toyota Aygo
- Product Codes: 6405V2, 6405HF, 6822VJ
- Other Numbers: 6405V2, 6405HF, 6822VJ
How It Works
The wiper arm clamps the wiper blade and transmits rotational motion from the wiper spindle to create the sweeping arc across the windshield. It also provides the necessary spring tension to keep the blade pressed against the glass for effective wiping and proper parking position.
Common Failure Modes
Wiper arms most commonly fail due to:
- Corrosion At The Pivot Or Splines Caused By Road Salt And Moisture, Leading To Seizure Or Play.
- Mechanical Damage From Ice, Snow Or Manual Force, Resulting In A Bent Arm And Poor Blade Contact.
- Worn Or Weakened Spring Tension Which Prevents Proper Pressure Of The Blade On The Windshield.
- Damaged Retention Clips Or Clips That No Longer Secure The Blade Correctly.
Replacement Procedure (Overview)
Basic Steps For Replacement:
- Park The Wipers In The Rest Position And Switch Off The Ignition.
- Lift The Arm Away From The Windscreen; If Fitted, Remove The Plastic Cap Covering The Pivot Nut.
- Loosen And Remove The Pivot Nut Securing The Arm To The Spindle (Use Appropriate Socket And Hold The Spindle To Avoid Damage).
- Pull The Old Arm Off The Splined Spindle (A Wiper Arm Puller May Be Required If Corroded).
- Fit The New Arm Onto The Splines In The Same Parking Orientation, Tighten The Pivot Nut Securely, Replace The Plastic Cap.
- Check Blade Alignment And Parking Position By Operating The Wipers Briefly; Adjust If Necessary.
Recommendations For Installation
- Use Correct Tools: Socket Set, Torque Wrench If Possible, And A Wiper Arm Puller For Stuck Arms.
- Mark The Original Parking Position Before Removal To Ensure Correct Refit Alignment.
- Inspect The Wiper Blade And Replace Simultaneously If Worn To Ensure Optimal Performance.
- Clean And Lightly Lubricate The Splines With Anti-Seize Where Appropriate To Prevent Future Seizure.
- After Installation, Verify Full Sweep And Correct Park Position; Make Minor Adjustments If Blade Does Not Rest Correctly.
Why Replace It Now?
If You Notice Streaking, Skipping, Excessive Noise, Visible Bend Or Play At The Wiper Arm Base, Replace The Arm To Restore Safe Visibility. Timely Replacement Prevents Uneven Blade Wear And Ensures Reliable Windshield Clearing In All Conditions.
Who Is This For
Ideal For Professional Workshops And Independent Mechanics As Well As Competent DIY Enthusiasts Looking For A Reliable, OE-Style Replacement Part For Citroën C1, Peugeot 107, And Compatible Toyota Aygo Models. Use The Product Codes Above When Searching For Exact Fitment.
Buy Now To Restore Proper Wiper Function And Improve Driving Visibility — Quick Fitment, OE-Related Codes, And Designed For Long-Term Service.
