Description
Right rear exterior mirror for Citroën C1 and Peugeot 107. Color KTA – Carlinite Grey paint. Passenger side.
Overview
This is a used right-hand exterior mirror (passenger side) for Citroën C1 and Peugeot 107 finished in KTA Carlinite Grey. Ideal for mechanics and DIY enthusiasts looking for an original-style replacement that fits directly to the door mounting points. The mirror is often searched by part numbers 87910-0H010 and 87910-0H011 — include these references when sourcing or comparing units.
Key Benefits
- Direct fitment to Citroën C1 and Peugeot 107 door mounting points.
- Painted To Match (KTA Carlinite Grey) — reduces need for respray compared to unpainted units.
- Cost-effective replacement for damaged or missing passenger-side mirror assemblies.
- Suitable For Workshops And DIY Repairs — commonly identified by OE codes for fast searching.
Features And Function
The exterior mirror provides rearward visibility from the passenger side. Depending on the original vehicle specification, the assembly may include an electric adjustment motor and/or an electrical connector for heated mirror function. This used unit is supplied as a complete mirror housing with glass and mounting plate (confirm exact equipment on the supplied unit by visual inspection before installation).
Fitment And Compatibility
- Make: Citroën / Peugeot
- Models: Citroën C1, Peugeot 107
- Side: Right / Passenger
- Commonly Searched OE Codes: 87910-0H010, 87910-0H011
Technical Information
- Manufacturer: Stellantis / Citroën / Peugeot
- Model: Citroën C1; Peugeot 107
- Product Codes: 87910-0H010; 87910-0H011
- Other Numbers: 8153YS; 815289; 8151HW; KTA
Installation
General replacement steps (typical for door-mounted exterior mirrors):
- Remove the interior door trim or triangular trim cover to access the mirror mounting area.
- Disconnect the mirror electrical connector if present.
- Unscrew or unbolt the mirror mounting nuts/bolts while supporting the mirror to avoid dropping it.
- Remove the old mirror assembly and fit the replacement unit, aligning locating pins and holes.
- Tighten mounting fasteners to manufacturer torque values, reconnect the electrical connector and refit interior trim.
- Test mirror adjustment, heating (if equipped) and folding functions before finishing.
Mounting Recommendation
Use proper trim tools to avoid damaging door panels. If the mirror has electrical functions, disconnect the battery or ensure ignition is off before unplugging connectors to prevent short circuits. Tighten mounting fasteners evenly and check that door seals and trim sit correctly after installation. If paint protection is needed during installation, protect the painted housing with soft tape or a cloth.
Most Common Failure Causes
Exterior mirrors typically fail due to external mechanical damage (impacts, collisions, or vandalism). Other frequent issues include water ingress leading to corroded connectors, worn or seized adjustment motors, broken mirror glass or cracked housings from age and repeated stresses. Cosmetic wear such as faded paint or scratches is common on used units — the KTA Carlinite Grey finish may show surface marks typical for a previously fitted part.
Notes For Buyers
This is a used (second-hand) original mirror assembly. Check the supplied unit visually for the exact equipment (electric adjustment, heating, folding) and overall condition before fitting. Use the OE product codes (87910-0H010 / 87910-0H011 and additional numbers listed above) when matching parts for faster identification.
