Description
Lock Set: Ignition Barrel, Fuel Filler Cap, Driver’s Door For Peugeot 307 CC. 1x Key.
High-quality used lock set designed for Peugeot 307 CC owners and professional mechanics looking for a reliable replacement option. This set includes the ignition barrel, fuel filler cap lock and the driver’s door lock, supplied with one key. Ideal for restoring locking functions after wear, key breakage or damage from corrosion and moisture. Commonly sought under product codes 4162KH and 4162KF (NFP), this set helps you get the vehicle back to secure operation without replacing entire lock assemblies.
Technical Information
- Manufacturer: Stellantis / Citroén / Peugeot
- Model: Peugeot 307 CC
- Product Codes: 4162KH, 4162KF, NFP
- Other Numbers: 1x Key Included
Compatibility And Use
Intended For Peugeot 307 CC (Coupe-Cabriolet) models. This set is suitable for vehicles that use the matching lock cylinders and hardware identified by the product codes above. It is aimed at professional workshops and DIY enthusiasts comfortable with lock and trim removal.
Installation Recommendations
Basic replacement overview:
- Always Disconnect The Battery Before Starting Work To Avoid Electrical Damage Or Unwanted Airbag Deployment.
- Ignition Barrel: Remove Steering Column Covers, Turn Key To The Release Position (Accessory/On As Required), Depress The Retaining Pin And Slide The Barrel Out. Fit The New Barrel And Reassemble Covers.
- Driver’s Door Lock: Remove Door Card, Disconnect Lock Rods And Electrical Connectors, Unscrew The Lock Cylinder Retaining Fasteners And Replace Cylinder. Reconnect Linkages And Test Manual Lock/Unlock Operation.
- Fuel Filler Cap Lock: Open Fuel Flap, Remove Internal Trim/Retainers As Required, Unscrew Or Unclip The Lock Actuator/Cylinder And Replace With Supplied Unit.
- If The Key Supplied Contains An Immobilizer Transponder, Key Cutting And/Or Transponder Programming May Be Required For Engine Start. This Should Be Performed By A Qualified Locksmith Or Dealer If Necessary.
Why This Part Fails Most Often
- Mechanical Wear: Tumblers And Wafers Wear Over Time Causing Slipping, Difficulty Turning Or Failure To Operate.
- Corrosion And Moisture Ingress: Salt, Water And Dirt Lead To Seizure Or Erratic Operation.
- Broken Or Worn Keys: Key Teeth Wear Or Breakage Can Damage The Cylinder Internals.
- Physical Damage Or Vandalism: Forced Entry Attempts Can Bend Or Break Lock Components.
- Electrical Failures In Central Locking Actuators: On Some Vehicles, Actuator Faults Cause The Lock To Stop Responding Even If The Cylinder Is Intact.
Notes For Mechanics And DIYers
This item Is Supplied As A Set Including One Key. Check Key Fit And Lock Operation Before Final Reassembly. When Replacing Multiple Cylinders, Consider Matching Worn Parts To Ensure Smooth Operation. For Vehicles With Immobilizer Systems, Verify Whether The Key Requires Programming To Enable Engine Start.
Included Items
Ignition Barrel, Fuel Filler Cap Lock, Driver’s Door Lock, 1x Key.
