Description
Right Passenger-Side Exterior Mirror For Citroën C3 Vehicles. Electrically Adjustable, Non-Heated, Temperature Sensor. 5-Pin Connector.
This replacement right (passenger-side) exterior mirror is designed for Citroën C3 cars and offers reliable electric adjustment without heating. Engineered for mechanics and DIY enthusiasts, the unit restores full mirror functionality after damage or electrical failure. Clear fitment identifiers such as part code 8149RW and the 5-pin connector make it easy to find the correct replacement and speed up workshop work.
Key Benefits: Improved Visibility And Safety — Restores precise mirror positioning for safe lane changes and parking; Direct Fitment — Designed to match original mounting points and electrical connectors for a fast swap; Sensor Integration — Built-in temperature sensor supports vehicle systems that rely on ambient readings even if the mirror is not heated.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën C3
- Product Codes: 8149RW
- Additional Numbers: 5-Pin Connector; Non-Heated; Electrically Adjustable; Temperature Sensor
Installation Recommendations
- Tools Typically Required: Trim removal tool, Torx or Phillips screwdrivers, 8–10 mm socket, and a small flat tool for connector release.
- Removal Steps (Overview): Fold mirror and remove interior triangular trim on the door, disconnect the electrical connector, unscrew the mirror mounting bolts, remove the old mirror assembly.
- Fitting Steps (Overview): Position the new mirror, secure mounting bolts hand-tight then final-tighten evenly, reconnect the 5-pin connector, re-fit interior trim, and test all functions (adjustment motor and sensor response) before finishing.
- Practical Tip: Test mirror movement and electrical continuity before reassembling the trim to avoid repeated disassembly. Avoid forcing the mirror housing—check for hidden screws behind trim panels.
Why This Part Fails Most Often
- Impact Damage: Collisions or side-swipes are the leading cause of physical damage to mirror housings and glass.
- Motor And Actuator Wear: Frequent adjustment, ingress of moisture, or worn gears can cause the electric adjustment motor to fail over time.
- Connector Corrosion Or Wiring Faults: Water ingress and corrosion at the 5-pin connector or wiring loom can interrupt power to the mirror motor or sensor.
- Environmental Degradation: UV exposure and temperature cycles can weaken plastic mounts and seals, eventually leading to looseness or cracking.
- Sensor Or Internal Component Fault: Although non-heated, the built-in temperature sensor or internal electronics can fail, affecting system readings or mirror functions.
Suitable for professional garages and competent DIYers: replace this part when the mirror no longer adjusts electrically, the housing is cracked, or electrical faults are present. Use the product code 8149RW and the 5-pin specification to confirm compatibility when searching parts or ordering replacements.
