Description
Socket For Right Rear Lamp For Citroën Xsara Estate
Bulb Functionality Not Guaranteed
Supplied With A Piece Of Wiring
Overview
Replacement socket for the right rear tail lamp on Citroën Xsara Estate models. This lamp holder accepts the standard bulb types used in the Xsara rear cluster and is supplied with a short section of wiring for a straightforward repair. Frequently searched under part number 6351J8, this component is a practical solution when the original socket shows corrosion, broken contacts or damaged wiring.
Compatibility
Designed For: Citroën Xsara Estate (Kombi) – Right Rear Tail Lamp Socket. Check vehicle lamp type and connector shape when matching the part; often sought by mechanics and DIY enthusiasts under the product code 6351J8.
How It Is Replaced
- Access The Tail Lamp: Open the trunk and remove interior trim or access panel to reach the rear lamp housing.
- Remove The Lamp Housing: Unscrew or unclip the lamp unit from the bodywork according to the vehicle’s clips/screws.
- Disconnect The Connector: Unplug the factory connector and carefully extract the damaged socket from the housing.
- Install The New Socket: Fit the new socket into the lamp cluster, reconnect the wiring section provided and secure the connector.
- Test The Circuit: Before refitting trim, verify bulb function and indicator/stop/position lamp operation.
- Reassemble: Reinstall the lamp housing and interior panels, ensuring all fasteners are tightened to manufacturer recommendations.
Technical Information
- Manufacturer: Stellantis / Citroën
- Model: Citroën Xsara Estate (Kombi)
- Product Codes: 6351J8
- Additional Numbers: N/A
Installation Recommendations
- Work In A Dry Environment: Moisture Promotes Corrosion; Keep The Area Dry While Replacing The Socket.
- Electrical Safety: Disconnect The Negative Battery Terminal Or Remove The Relevant Fuse To Avoid Short Circuits When Handling The Connector.
- Use Correct Tools: Trim Tools, Torx/Philips Screwdrivers And A Multimeter For Quick Continuity Checks Are Helpful.
- Secure Connections: Ensure All Pins Are Clean And Make Firm Contact; Apply Dielectric Grease If Desired To Reduce Corrosion Risk.
- Final Check: Verify All Light Functions (Brake, Indicator, Reverse, Position) After Installation.
Why This Part Most Commonly Fails
- Corrosion From Moisture Ingress: Water Intrusion Into The Lamp Assembly Leads To Oxidation Of Contacts.
- Heat Damage: Poor Contact Or High-Resistance Connections Can Cause Localised Heating, Melting The Socket Plastic.
- Mechanical Wear: Repeated Bulb Changes Or Vibrations Can Break Pins Or Crack The Housing.
- Damaged Wiring: Chafing Or Previous Improper Repairs May Lead To Broken Conductors In The Loom Section.
This replacement socket is a cost-effective way to restore reliable tail lamp operation on Citroën Xsara Estate vehicles. If you frequently repair lighting on older cars, keeping a spare socket (part 6351J8) in your workshop can save time on common roadside fixes.
