Description
Right rear lamp for PEUGEOT 207 3- and 5-door models. From 2010 with LED lighting. Passenger side.
Overview
This right rear lamp (passenger side) is a direct-fit LED tail light designed for Peugeot 207 3- and 5-door models from 2010 onwards. It replaces the damaged or worn factory unit and restores full rear lighting functionality including position, brake and indicator visibility where LED equipment is fitted. Commonly searched by part numbers 9686565980 and 6351HQ, this lamp is suitable for professionals and skilled DIYers repairing Peugeot 207 lighting assemblies.
Function and Application
The unit houses the rear lighting functions for the right side of the vehicle. On LED-equipped versions it provides improved brightness, faster response for brake lights and longer service life compared with conventional bulbs. Use this lamp when the outer lens is cracked, LEDs fail, internal condensation appears or mounting tabs are broken.
Compatibility
- Make: Peugeot (Stellantis)
- Model: Peugeot 207, 3-door and 5-door variants
- Years: From 2010 for LED-equipped rear lighting versions
- Side: Right / Passenger Side
How To Replace
- Open the boot and remove the relevant trim panels to access the lamp mounting nuts.
- Unscrew the retaining nuts (usually 2–3) and carefully pull the lamp unit slightly outwards.
- Disconnect the electrical connector and any bulb holders if present. For LED versions the connector may be a sealed plug.
- Fit the new lamp into position, reconnect the electrical connector and secure the mounting nuts evenly.
- Reinstall trim panels and check all functions (tail/stop/indicator) before road use.
Installation Recommendations
- Disconnect the negative battery terminal before starting work to avoid short circuits and electrical damage.
- Inspect sealing surfaces and replace any damaged gaskets or foam seals to prevent water ingress.
- Handle the lamp by the housing to avoid damaging LED modules or lenses; avoid touching electrical contacts.
- If connectors are corroded, clean or replace them to ensure reliable contact; use dielectric grease on connections to slow future corrosion.
- After installation verify all lighting functions and perform a visual alignment check to ensure correct fitment.
Common Causes Of Failure
- Impact damage from minor collisions or bumps that crack the lens or break mounting tabs.
- Water ingress or condensation leading to corrosion of contacts and failure of LED modules or internal wiring.
- Vibration and ageing causing connector fatigue or LED driver faults.
- Poor sealing after previous repairs allowing moisture and dirt to accumulate.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 207 (3-door and 5-door), Right (Passenger) Rear Lamp
- Product Codes: 9686565980, 6351HQ
- Additional Numbers: Not available
Notes For Professionals and DIYers
This lamp is intended for mechanics and experienced car owners. When replacing an LED rear lamp, ensure connectors and vehicle body seals are in good condition to preserve longevity. Use the OEM product codes 9686565980 or 6351HQ when searching to improve chances of finding the exact match. Proper installation restores safety and legal compliance of rear lighting.
