Description
Passenger seat airbag for Peugeot 307. Wiring may not be included.
This Right Passenger Seat Airbag is designed for Peugeot 307 vehicles and restores the seat occupant protection provided by the original equipment. The module deploys in the event of a qualifying collision to reduce injury risk for the front passenger. Ideal for professional garages and skilled DIY enthusiasts who repair interior safety systems, this airbag unit carries common OEM references used when searching by product code (5110819, 8216L2, 8216FH), making it easy to find and match.
Key Benefits
- Direct fit for compatible Peugeot 307 models (see Technical Information below).
- OEM-referenced part numbers for straightforward identification.
- Restores passenger protection after deployment or module failure.
- Compact seat-mounted design for straightforward replacement when parts and connectors are present.
Technical Information
- Manufacturer: Stellantis / Peugeot
- Model: Peugeot 307 I (first generation) — Passenger Seat (Right)
- Product Codes: 5110819
- Additional Numbers: 8216L2, 8216FH
Installation Recommendations
Only qualified personnel should replace airbag modules. Follow these general steps and always consult the vehicle manufacturer repair manual for exact procedures and torque specifications:
- Disconnect the vehicle battery before work and wait at least 10 minutes to allow SRS capacitors to discharge.
- Remove seat trim and upholstery as required to access the airbag module mounting points. Keep fasteners and clips organized.
- Carefully disconnect the airbag electrical connector(s). Note that the wiring harness may not be supplied with the module; check connector condition and availability before installation.
- Unbolt the airbag module from the seat frame and replace with the new unit. Tighten bolts to the manufacturer’s specified torque.
- Reconnect the electrical connector(s) and reassemble the seat trim. Reconnect the battery and clear SRS fault codes with a diagnostic tool (DiagBox or equivalent). Verify SRS warning lamp extinguishes and perform a system check.
Reason For Failure
- Deployment After Collision: Airbags are single-use; a deployed module must be replaced.
- Connector Or Wiring Damage: Seat removal, water ingress, or corrosion can damage the squib connector or harness, causing SRS faults.
- Electrical Faults: Open circuits, high resistance in the squib circuit, or damaged clock spring can trigger the SRS warning light and prevent deployment.
- Physical Damage Or Contamination: Moisture, heavy soiling, or mechanical damage to the module can render it inoperable.
Additional Notes
Wiring may not be included with the airbag module. If the seat harness or connectors are damaged or missing, obtain the correct replacement harness matching the vehicle and module connector. After installation, always verify SRS system status with an appropriate diagnostic tool and follow Peugeot/PSA service instructions.
Typical Search Keywords
Passenger Seat Airbag, Right Seat Airbag, Peugeot 307 Airbag, 5110819, 8216L2, 8216FH, SRS Passenger Airbag, Seat Airbag Replacement
