Description
Airbag for steering wheel for Citroën Xsara and Xsara Picasso up to 2002.
High-quality replacement steering wheel airbag designed for Citroën Xsara and Xsara Picasso models produced up to 2002. Ideal for professional workshops and experienced DIY mechanics, this airbag restores driver-side frontal-impact protection after deployment or damage. Keywords: Steering Wheel Airbag, Citroën Xsara Airbag, Xsara Picasso Airbag, 96447629ZL, 4112FN.
Function and Fitment
The airbag module is the primary driver restraint in frontal collisions. It mounts centrally in the steering wheel and works together with the seat belts and SRS components to reduce injury risk. This unit fits Citroën Xsara and Xsara Picasso models up to model year 2002. Verify physical match with the steering wheel, connector type and clock spring orientation before installation.
Technical Information
- Manufacturer: Citroën (Stellantis)
- Model: Xsara, Xsara Picasso (up to 2002)
- Product Codes: 96447629ZL, 4112FN
- Other Numbers: NFP
Replacement Procedure Overview
Replacement requires careful handling of the SRS system. Typical steps: disconnect the negative battery terminal and wait the manufacturer-recommended time for SRS capacitors to discharge; remove the airbag trim and remove retaining bolts/screws securing the module; disconnect the airbag electrical connector(s) using appropriate tools; replace the module and reattach connectors ensuring secure latching; reassemble steering wheel trim and reconnect the battery. After installation, verify that the SRS warning lamp behaves normally during ignition sequence. If the SRS lamp remains on, further diagnosis of wiring, connectors or clockspring is required.
Installation Recommendations
- Always Disconnect The Battery Before Work: Remove the negative terminal and wait the recommended discharge time to prevent accidental deployment.
- Follow Manufacturer Procedures: Use Citroën service instructions for removal and refit to avoid damage to the module or steering wheel components.
- Handle With Care: Store the airbag facing upward and avoid impacts, heat sources and moisture.
- Check Connectors And Clockspring: Ensure connectors are corrosion-free and the clockspring is intact and correctly indexed.
- Professional Calibration If Needed: If replacement requires additional calibration or SRS system clearing, use appropriate diagnostic tools or a qualified technician.
Why This Part Most Commonly Fails
Airbags rarely fail during normal life but become non-functional after deployment in a collision. Other common causes of failure include water ingress or corrosion of connectors, damage to wiring harnesses or clockspring faults that interrupt the airbag circuit, and prior improper handling during disassembly. Visible damage, missing components, or a persistent SRS warning light indicate the airbag or related circuitry needs inspection or replacement.
Purchase this steering wheel airbag if you are repairing crash-damaged Citroën Xsara or Xsara Picasso vehicles and require a direct-fit driver airbag module. Suitable for mechanics and experienced DIYers familiar with SRS safety procedures.
