Description
Third brake light for Citroën Berlingo I and II and Peugeot Partner I and II. Fully functional; the functionality of the bulbs themselves is not guaranteed. For rear double-wing doors.
The high-mounted third brake light (center high-mounted stop lamp) is an OEM-fit replacement designed for rear double-wing doors on Citroën Berlingo and Peugeot Partner models of the first and second generations. Ideal for professional workshops and DIY mechanics who need a direct-fit exterior lamp to restore rear signalling and brake visibility. The part improves vehicle safety by providing a clear, elevated brake signal to following traffic and meets the original mounting points for straightforward fitment.
Technical Information
- Manufacturer: Stellantis (Citroën/Peugeot)
- Model: Citroën Berlingo I, Citroën Berlingo II, Peugeot Partner I, Peugeot Partner II
- Product Codes: 6350AS
- Additional Numbers: No additional reference numbers provided
Fitment And Function
This unit is intended for installation on vehicles with rear double-wing (two-leaf) cargo doors. It houses the brake lamp circuit (third stop lamp) and may use replaceable bulbs or an internal lamp assembly depending on the production version. The unit restores the center brake signal which is essential for legal road use and improved rear visibility.
How To Replace (Workshop/DIY)
- Tools Recommended: Phillips screwdriver, flat trim tool, 7–10 mm socket set, electrical contact cleaner, gloves.
- Approximate Time: 20–45 minutes depending on interior trim removal experience.
- Typical Steps: Remove interior trim panel of the rear door to access lamp screws; disconnect the electrical connector; remove retaining screws and extract the lamp housing; replace with the new unit and reconnect the connector; test braking lamp operation before refitting trim. Ensure bulbs are seated correctly if they are user-replaceable.
- Safety Note: Before starting, disconnect battery if working near vehicle wiring and follow standard workshop safety practices to avoid short circuits or damage.
Recommended For Installation
Installation Recommended By: Experienced Auto Technicians Or Competent DIY Mechanics. Check lamp orientation and connector seating after installation. If the lamp uses replaceable bulbs, verify bulb type and condition; replace bulbs if their condition is uncertain.
Why This Part Commonly Fails
- Water Ingress And Corrosion: Exposure to moisture can corrode contacts, cause short circuits, or fog the lens.
- Impact Or Mechanical Damage: Rear door impacts or heavy loading can crack the lens or damage mounting points.
- Electrical Issues: Loose connectors, broken wires in the door harness, or faulty bulb filaments can lead to intermittent or complete failure.
- Aging And UV Exposure: Over time seals and plastics degrade, allowing contaminants in and reducing light output.
Spare Parts And Tips
When replacing the third brake light, inspect the wiring harness and connectors for corrosion or wear. If bulbs are not guaranteed, consider fitting new bulbs compatible with the lamp assembly to ensure reliable operation. Verify the lamp alignment and secure fastening to prevent vibration-induced failures.
