Description
Driver’s Seat Airbag for Peugeot 307 CC
This left seat (driver side) airbag is a direct-fit replacement intended for Peugeot 307 CC models. Ideal for professional auto workshops and experienced DIYers, this airbag is commonly searched by product codes and OE numbers, making it easy to find when repairing SRS faults or following a deployment incident. The unit restores side-impact protection at the seat and works with the vehicle’s existing restraint system when correctly installed and configured.
Compatibility
Designed For: Peugeot 307 CC
Technical Information
- Manufacturer: Stellantis / Citroén / Peugeot
- Model: Peugeot 307 CC
- Product Codes: 96457585ZR, 8216Z0
- Other Numbers: NFP
- Seat Position: Left (Driver)
Function
The seat side airbag protects the occupant’s torso and pelvis during a side-impact collision. It is integrated into the seat structure (side bolster) and connects to the vehicle’s SRS system via a dedicated airbag squib and wiring harness. When the SRS control unit detects a qualifying crash, it deploys the airbag to reduce injury risk.
How It Is Replaced
- Safety First: Disconnect the negative battery terminal and wait at least 10 minutes (or follow the manufacturer’s recommended wait time) to discharge residual energy in the SRS system.
- Remove Seat: Tilt and detach the driver seat as required to access the side airbag mounting points and connector. Keep fasteners and trim organized.
- Disconnect Connector: Unclip the airbag electrical connector carefully; avoid pulling on wires. Inspect connector and wiring for damage or corrosion.
- Remove Airbag Module: Unscrew or unclip the airbag module from the seat frame following the seat’s service procedure.
- Install New Unit: Fit the replacement airbag into the seat, secure fasteners to the correct torque, and reconnect the electrical connector ensuring proper engagement.
- Reinstall Seat And Reconnect Battery: Refit the seat, reconnect the battery, and clear SRS fault codes with a compatible diagnostic tool. Verify that the airbag warning light behaves correctly (initial illumination on key-on, then off).
Installation Recommendations
- Always Disconnect The Battery Before Any Work On The SRS System And Observe The Manufacturer’s Safety Procedures.
- Use Proper Tools And Torque Settings For Seat Fasteners To Maintain Seat Integrity In A Crash.
- Inspect Wiring Harnesses, Connectors And Seat Occupancy Sensor (If Present) For Damage Before Installation.
- After Installation, Use An SRS-Capable Diagnostic Tool To Clear Fault Codes And Confirm Proper System Status.
- If Unsure About Wiring Or Fault Codes, Have The Final Configuration Verified By A Qualified Technician.
Why This Part Fails Most Often
- Deployment In A Collision: Airbags Are Single-Use Components; A Deployed Airbag Must Be Replaced.
- Connector Or Wiring Damage: Wear, Seat Movement, Or Previous Repairs Can Damage The Harness Or Pins, Causing Intermittent Faults.
- Corrosion Or Moisture Ingress: Water Damage From Spills Or Flooding Can Corrode Connectors And Compromise The Squib Circuit.
- Improper Handling During Removal/Installation: Static Discharge Or Mechanical Damage To The Squib Can Render The Airbag Inoperative.
- Faults Detected By SRS Control Unit: Persistent Airbag Warning Light Usually Indicates A Circuit Issue, Short Or Open, Which May Point To The Seat Airbag Or Associated Wiring.
Order this left seat airbag if you need a direct replacement for a Peugeot 307 CC after deployment or to resolve a seat-side SRS fault. Accurate product codes (96457585ZR, 8216Z0) help ensure you select the correct unit quickly during parts lookup and repairs.
