Description
Seat Heater Control For CITROËN, PEUGEOT And Other Stellantis Models.
Product Description
Direct-fit Seat Heater Control designed for a range of Stellantis vehicles, including many Citroën and Peugeot models. This switch restores user control over seat heating levels and provides the familiar OEM interface that mechanics and DIY enthusiasts expect. Ideal replacement when the original controller fails to respond, shows intermittent operation, or has damaged buttons or illumination.
Why Choose This Part
Built to fit the original mounting and electrical connector, this seat heater control saves time during installation and reduces the need for wiring modifications. It is a practical spare for workshops and home mechanics who service Citroën Berlingo, Peugeot Rifter and other platform-related vehicles. Commonly searched by part numbers 98205618ZD and 9820561877, making it easy to find in catalogs and search engines.
Installation Guide
- Disconnect The Battery Before Starting Work To Prevent Short Circuits And Electronic Damage.
- Remove Trim Panels Around The Seat Or Center Console To Access The Switch Module.
- Unplug The OEM Electrical Connector And Unscrew Or Unclip The Old Switch From Its Mounting.
- Fit The New Unit In Place, Reconnect The Connector, And Reassemble Trim Panels.
- Reconnect The Battery And Verify Functionality: Check All Heating Levels, Indicator Illumination And Interlocks.
Most Common Causes Of Failure
- Wear Of Internal Contacts And Switch Mechanisms Due To Frequent Use.
- Moisture Ingress From Spilled Liquids Leading To Corrosion Or Short Circuits.
- Broken Or Damaged Connectors And Wiring From Seat Movement Or Previous Repairs.
- Illumination Failure From Burnt LEDs Or Wiring Faults Affecting Visibility At Night.
Technical Information
- Manufacturer: Stellantis
- Model: Citroën Berlingo (K9), Fiat Doblo III, Opel Combo E (K9), Peugeot Rifter, Toyota ProAce City
- Product Codes: 98205618ZD, 9820561877
- Other Numbers: Not Specified
Recommendations For Installation
Perform The Replacement In A Clean, Dry Environment. Inspect The Wiring Harness For Damage Or Corrosion Before Reconnecting The New Switch. If Seat Electronics Are Integrated With Airbag Or Comfort Systems, Follow Manufacturer Procedures When Removing Trim To Avoid Activating Restraint Systems. After Installation, Verify That All Seat Heating Levels Work And That Any Related Comfort Functions Are Unaffected.
Notes For Mechanics And DIY Enthusiasts
This control unit is a straightforward repair for workshops and competent home mechanics familiar with interior trim removal and basic electrical checks. It is commonly identified by the part numbers listed above, so searching by these codes in parts catalogs will help locate the correct item quickly. If intermittent operation is reported, check for loose connectors or water ingress before replacing the module.








